{"product_id":"sensor-light-remote-control-white","title":"Sensor Light Remote Control - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eThis white handheld remote control changes a sensor light's settings from the floor. It is a round-cornered rectangle, taller than it is wide, with 22 buttons, each carrying its own label or symbol. On\/Off and Sensor sit at the top. Beneath them are five labelled rows of four: Stand-by Dim Level, with a pair of Dim buttons marked plus and minus beside 10% and 30%; Hold Time, at 30 seconds, 1, 5 and 10 minutes; Detection Area, marked with arrows that shorten from left to right; Stand-by Period, at 0 seconds, 3 and 10 minutes and an infinity sign; and Daylight Threshold, with Test and Disable either side of a moon and a sun.\u003c\/p\u003e\u003cp\u003eSensor lighting earns its place in spaces people pass through: hallways, stairwells, corridors, storerooms and garages. Those fittings usually sit on a ceiling or high on a wall, and a remote spares whoever looks after them a ladder whenever something needs changing. It suits the installer, landlord or facilities manager who wants a light that stays on long enough for someone to reach the end of a corridor, yet stays off in a room already full of daylight. In a stairwell, a light that dims to a low stand-by level rather than switching straight off means nobody steps onto a dark landing.\u003c\/p\u003e\u003cp\u003eA remote only works with a sensor built to receive it, and the manufacturer does not list the fittings this one pairs with, so check your fitting's instructions for a remote with these same button groups before you order. Nor does the manufacturer state the battery the remote takes, whether one is supplied, whether it uses infrared or radio, its range, size or IP rating. You receive one remote control, and the minimum order is one. Keep it with the fitting's paperwork for the day a space changes use.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHandheld remote control for sensor lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 remote control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eWhich sensor lights will this remote work with?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacturer does not name the fittings it pairs with. If the instructions for your sensor fitting show a remote, compare the rows: this one runs On\/Off and Sensor, then Stand-by Dim Level, Hold Time, Detection Area, Stand-by Period and Daylight Threshold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does hold time mean, and what are the options?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a sensor light, the hold time is how long the light stays on after the last movement it detects. The Hold Time row offers 30 seconds, 1 minute, 5 minutes and 10 minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the stand-by dim level and stand-by period for?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a sensor light with a stand-by function, the dim level is the low brightness it falls back to once the hold time ends, and the period is how long it stays there before switching off. The dim level row offers Dim plus and minus, 10% and 30%; the period row offers 0 seconds, 3 minutes, 10 minutes and a button marked with an infinity sign.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reduce how far the sensor reaches?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a sensor light, the detection area is how far out movement is picked up, and a smaller area helps stop the light reacting to movement beyond the space it serves. The Detection Area row has four buttons, marked with arrows that shorten from left to right.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the daylight threshold do?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA daylight threshold is the brightness above which a sensor light will not switch on, so it can stay off while a space is already bright. The Daylight Threshold row has Test and Disable buttons, with a moon symbol and a sun symbol between them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat battery does it take, and how far away can I use it?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacturer does not state the battery the remote takes, whether one is supplied, how far away it works, or whether it uses infrared or radio. As a general rule, an infrared remote needs a clear line of sight to the sensor and a radio remote does not.\u003c\/p\u003e","brand":"LumiLife","offers":[{"title":"Default Title","offer_id":53391763767563,"sku":"S33579","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S33579_00.jpg?v=1790413983","url":"https:\/\/niori.co.uk\/products\/sensor-light-remote-control-white","provider":"Niori","version":"1.0","type":"link"}