{"product_id":"screened-satellite-f-type-outlet-module-25-x-50mm-black","title":"Screened Satellite F-Type Outlet Module 25 x 50mm - Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge NETSATSBK is a single-gang satellite outlet module with an F-type connection, designed to fit a standard 25 x 50mm grid mounting system. The module is fully screened to EN 50083-2 to minimise signal ingress and cross-talk between adjacent modules, providing low-loss transmission for satellite RF signals between the dish and the receiver.\u003c\/p\u003e\n\u003cp\u003eInstalled in residential and commercial grid systems, the module accepts coaxial cables with a 1mm conductor (PF100, H109F, QF100 types) via clamp and screw terminals at the rear. The 35mm minimum mounting box depth allows it to fit shallow-depth grid back boxes without requiring additional recessing. The module clips into a standard grid frame and can be combined with other 25 x 50mm modules (switches, sockets, data outlets) to create multi-gang assemblies.\u003c\/p\u003e\n\u003cp\u003eThe matt black ABS faceplate matches other Knightsbridge grid modules in the same finish, allowing consistent styling across a room or installation. The F-type connector is recessed 30mm behind the faceplate, protecting the thread from accidental contact and providing space for cable strain relief once the coaxial connector is screwed on.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Mounting Box Depth\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSAT Connection Type\u003c\/td\u003e\n\u003ctd\u003eF-Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal\u003c\/td\u003e\n\u003ctd\u003eClamp \u0026amp; Screw Terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1664574_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cables does this module accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe module is designed for coaxial cables with a 1mm centre conductor, including PF100, H109F and QF100 types commonly used for satellite installations. The clamp and screw terminal at the rear provides a secure connection for the cable's outer braid and centre conductor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat mounting box depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 35mm mounting box depth is needed. The module itself has a 30mm recessed depth behind the faceplate, so the total projection from the wall once installed is determined by the grid frame and back box used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this module screened?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The module is fully screened to EN 50083-2, which minimises signal ingress from external sources and reduces cross-talk between adjacent modules in a multi-gang grid assembly. This maintains signal quality and reduces interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be combined with other grid modules?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 25 x 50mm format is part of Knightsbridge's modular grid system, allowing this satellite outlet to be mounted alongside switches, sockets, data outlets and other 25 x 50mm modules in a single or multi-gang grid frame.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293911834891,"sku":"NETSATSBK","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/110612_a9ee8522-74ab-405f-8f74-2200f8a0b49b.jpg?v=1714666137","url":"https:\/\/niori.co.uk\/products\/screened-satellite-f-type-outlet-module-25-x-50mm-black","provider":"Niori","version":"1.0","type":"link"}