{"product_id":"rgbw-led-strip-l-connector-12mm-5-pack","title":"RGBW LED Strip L Connector 12mm - 5 Pack","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThese L-shaped snap-fit connectors join two runs of 12mm RGBW LED tape at a 90-degree angle, allowing the strip to route around internal corners, cabinet edges or alcove perimeters without soldering. Each connector holds 30 x 30mm footprint and 5mm height, with spring-loaded contacts that grip the tape's copper pads when the cover is pressed closed.\u003c\/p\u003e\n\u003cp\u003eDesigned for internal LED strip installations in kitchens, cabinets, shelving and display units, the connectors suit 12mm-wide RGBW tape only and are not compatible with single-colour or RGB variants. The IP20 rating limits them to dry internal environments — they cannot be used in bathrooms, outdoor installations or anywhere moisture is present. The pack contains five connectors, sufficient for routing a single run through multiple corners or splitting across several separate installations.\u003c\/p\u003e\n\u003cp\u003eThe white polymer housing blends into white or light-coloured surfaces and can be tucked into cabinet recesses or behind trim where the join needs to be concealed. The snap-fit design means the tape can be removed and repositioned if needed during installation, though repeated opening and closing of the spring contacts will eventually reduce contact pressure. Each connector accepts standard 12mm RGBW tape with exposed copper pads at the cut points — pre-tinned or sleeved cable ends will not fit.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTape version\u003c\/td\u003e\n\u003ctd\u003e12mm RGBW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e30 x 30 x 5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED tape is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is designed specifically for 12mm-wide RGBW LED tape with exposed copper contact pads. It will not fit single-colour, RGB or narrower\/wider tape variants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan these be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector offers no protection against moisture or dust ingress. Use only in dry internal environments such as kitchens, cabinets and shelving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connectors use spring-loaded contacts that grip the tape's copper pads when the cover is pressed closed. The tape must be cut cleanly at a designated cut point to expose the pads before insertion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many times can the connector be opened and re-closed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe spring contacts are rated for several cycles during installation, but repeated opening and closing will gradually reduce contact pressure and increase the risk of poor connection. Aim to position the tape correctly on the first or second attempt.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313194000651,"sku":"156.156UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156156UK_CO1_b74d83bb-b6f9-4a01-93d3-5e90fd12171f.jpg?v=1715189039","url":"https:\/\/niori.co.uk\/products\/rgbw-led-strip-l-connector-12mm-5-pack","provider":"Niori","version":"1.0","type":"link"}