{"product_id":"rgbw-led-strip-flex-link-135mm-solderless-connector-5-pack","title":"RGBW LED Strip Flex Link 135mm Solderless Connector - 5 Pack","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT RGBW flex link is a 135mm solderless connector cable for joining sections of 12mm RGBW LED strip tape. Each link carries five cores (black, green, red, blue, white) and terminates in snap-fit connectors at both ends, allowing two pieces of LED tape to be joined without soldering or specialist tools. The cable fits into the gap between tape sections when running round corners, bridging obstacles, or extending a run across a non-lit section.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential accent lighting, retail display installations, hospitality fitouts and bar\/club environments where RGBW LED tape needs to navigate corners or gaps. The 135mm length gives enough slack to turn a 90-degree corner on wall-mounted tape or to route the cable behind a coving or architrave. The IP20 rating limits the connector to dry indoor use — it cannot be used in bathrooms, kitchens near sinks, or outdoors.\u003c\/p\u003e\n\u003cp\u003eEach connector aligns with the contact pads on the LED tape and clips into place with finger pressure, holding securely without adhesive or screws. The 5-core design maintains separate channels for red, green, blue and white LEDs plus a common negative, allowing full RGBW colour mixing to continue across the joint. The pack contains five links, giving enough connectors to handle a typical room installation with multiple corners or sections.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTape version\u003c\/td\u003e\n\u003ctd\u003e12mm RGBW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCores\u003c\/td\u003e\n\u003ctd\u003e5 (black, green, red, blue, white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire length\u003c\/td\u003e\n\u003ctd\u003e13.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e17 x 1.5 x 0.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.03kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDo these connectors work with RGB tape or only RGBW?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese are 5-core connectors designed for RGBW tape (red, green, blue, white plus common negative). They will not work with standard RGB tape, which uses a 4-core configuration. Use the dedicated RGB flex links for standard RGB tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan these be used outdoors or in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connectors are not protected against moisture. Use them only in dry indoor locations away from sinks, showers, and exterior installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do the snap connectors attach to the LED tape?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlign the connector with the contact pads on the cut end of the LED tape, ensuring the colour markings on the connector match the tape's polarity. Press the connector down until it clicks into place. No soldering or tools are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum voltage these can handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe specification does not state a maximum voltage, but RGBW LED tape typically runs on 12V or 24V DC. Confirm compatibility with your specific tape and power supply before installation.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313193967883,"sku":"156.154UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156154UK_CO1_9cd328e3-7840-44cd-8a46-006083b8f144.jpg?v=1715189036","url":"https:\/\/niori.co.uk\/products\/rgbw-led-strip-flex-link-135mm-solderless-connector-5-pack","provider":"Niori","version":"1.0","type":"link"}