{"product_id":"radity-magnetic-track-internal-power-connector-white","title":"Radity Magnetic Track Internal Power Connector - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Radity internal power connector joins two sections of Maytoni's Radity magnetic track system, transferring 48V DC power between track segments for continuous lighting runs. The connector sits inside the track profile at the join point, concealing the electrical connection behind the white plastic housing and maintaining a clean unbroken line along the ceiling or wall.\u003c\/p\u003e\n\u003cp\u003eDesigned for modular track lighting installations where multiple track lengths need to be joined end-to-end, the connector allows layouts to extend around corners, across long walls, or through adjacent rooms without visible cable runs. The surface-mounted Radity track system carries magnetic low-voltage spotlights that clip onto the track and can be repositioned along its length, with the internal connector ensuring power continuity across the full run.\u003c\/p\u003e\n\u003cp\u003eThe connector measures 55mm length x 55mm height x 25mm width and fits flush inside the standard Radity track profile. The white plastic construction matches the track finish and disappears into the joint line when installed. The 48V DC low-voltage system reduces the risk of electric shock compared to mains-voltage track, making it suitable for both residential and commercial installations where users may reposition spotlights frequently.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e5.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e5.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2.5cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Year Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/instruction_eu_TR032-4-5W3K-S-DS-B.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this connector used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal power connector joins two sections of Radity magnetic track together, transferring 48V DC power between track segments so the lighting run can extend beyond a single track length. It sits inside the track profile at the join point and is not visible once installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with all Radity track products?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis connector is designed specifically for the Maytoni Radity magnetic track system. It will not work with other manufacturers' track systems or with Maytoni's other track ranges that use different voltage or mounting standards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector slots into the track channel at the join point between two track sections, creating an electrical bridge. Installation typically requires the track sections to be aligned end-to-end with the connector seated inside both profiles. Full fitting instructions are in the product manual linked in the Downloads section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple connectors be used in one track run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Multiple internal connectors can be used to join three or more track sections into a continuous lighting run, provided the total load across all connected spotlights does not exceed the system's maximum wattage rating.\u003c\/p\u003e","brand":"Maytoni","offers":[{"title":"Default Title","offer_id":45728914473227,"sku":"TRA084CI-11W","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/RENDER_TRA084CI-11W_on_w_standard_fdc61f2d-6129-4a3b-a87a-f767c46d8fba.jpg?v=1737121628","url":"https:\/\/niori.co.uk\/products\/radity-magnetic-track-internal-power-connector-white","provider":"Niori","version":"1.0","type":"link"}