{"product_id":"radiara-31w-constant-current-dimmable-led-driver-900ma-1-10v","title":"Radiara 31W Constant Current Dimmable LED Driver - 900mA 1-10V","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Radiara is a 31W constant current LED driver delivering 900mA output with 1-10V dimming control, housed in a white plastic enclosure measuring 150mm long by 43mm wide. It converts mains voltage to stable constant current output suitable for LED strips, downlight arrays and panel lights requiring consistent 900mA current regulation.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor commercial and residential installations where dimming control is needed, the driver pairs with 1-10V control systems common in office lighting, retail display lighting and hospitality environments. The 1-10V protocol allows the driver to be controlled from wall-mounted dimmer switches, lighting management systems or building automation controllers. Output current remains constant at 900mA across the full dimming range, preventing colour shift and flicker as the light level changes.\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits the driver to dry indoor locations — ceiling voids above offices, behind retail display panels, within kitchen cabinet lighting runs. The compact 150mm x 43mm footprint fits into shallow ceiling voids and narrow cabinet runs where larger mains-voltage transformers would not. Thermal protection shuts the driver down if internal temperature exceeds safe operating limits, automatically resetting once the unit cools. The driver carries a 5-year warranty covering component failure under normal operating conditions.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED fixtures does this driver suit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny LED fitting requiring 900mA constant current input and up to 31W total power. This includes most commercial LED strips rated at 900mA, downlight arrays wired in series, and panel lights specifying constant current drivers. Check your LED fixture's data sheet for the required current — if it states 900mA, this driver is compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 1-10V dimming mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-10V is a control signal protocol where a separate low-voltage cable (typically 2-core) carries the dimming instruction from a controller to the driver. At 10V the driver outputs full brightness; at 1V it outputs minimum brightness (typically 10% of full output). The control cable is run separately from the mains supply and connects to the designated 1-10V terminals on the driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be installed in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating provides no protection against moisture or water ingress. The driver must be installed in a dry indoor location such as a ceiling void, cupboard or behind a panel where it will not be exposed to steam, condensation or water splash.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need ventilation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The driver dissipates heat during operation and requires free air circulation around the housing. Do not install in a sealed enclosure or tightly packed cavity with no airflow. Allow at least 20mm clearance around all sides of the driver body for natural convection cooling.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45732933337355,"sku":"218854","price":41.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/218854_WEB001_BASIC_DRIVER_1_10V_31W_900mA_d7b5f7c5-8342-4e93-90f8-f41e8acfebd9.jpg?v=1724709465","url":"https:\/\/niori.co.uk\/products\/radiara-31w-constant-current-dimmable-led-driver-900ma-1-10v","provider":"Niori","version":"1.0","type":"link"}