{"product_id":"qtx-qt6-6-5-replacement-woofer-driver","title":"QTX QT6 6.5\" Replacement Woofer Driver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a replacement chassis speaker for the QTX QT series, sized at 6.5 inches and built to fit the QT6 cabinet. It works as a woofer within a full-range speaker enclosure, handling the lower and mid frequencies while the cabinet's other drivers cover the top end. If you have a damaged or worn driver, this gives you a direct like-for-like part to get the speaker working again.\u003c\/p\u003e\n\u003cp\u003eThe driver has an impedance of 8 ohms, which matches the standard rating for most QTX QT series cabinets, so you can drop it in without worrying about mismatched loads. Connection is made through spade terminals, sometimes called blade or push-on connectors, which let you attach the wiring quickly by hand. There is no soldering needed, so a swap can be done with basic tools and a little care.\u003c\/p\u003e\n\u003cp\u003eWe supply this as part of our range of QT series replacement drivers, so you can source the correct chassis speaker for your model rather than replacing the whole cabinet. It suits anyone maintaining an existing PA or background music setup where one driver has failed. Check the size and terminal type against your current driver before ordering to make sure it is the right fit for your enclosure.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.06KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e70mm x 167mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e25mm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPL @ 1W\/1m\u003c\/td\u003e\n\u003ctd\u003e90dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet weight\u003c\/td\u003e\n\u003ctd\u003e0.56KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e60Hz - 8kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e16.5cm (6.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet size\u003c\/td\u003e\n\u003ctd\u003e100mm x 18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rms\u003c\/td\u003e\n\u003ctd\u003e60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower max.\u003c\/td\u003e\n\u003ctd\u003e120W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich speakers does this driver fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is designed for the QTX QT series, specifically the QT6 cabinet, as a 6.5\" replacement woofer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is this driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver is rated at 8 ohms, matching the standard load for QTX QT series cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the driver connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses spade terminals, also known as push-on or blade connectors, so no soldering is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this as a woofer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is intended for use as a woofer in full-range speaker cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need any special tools to fit it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. With spade terminals you can attach the wiring by hand, so basic tools are enough for a swap.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272103059723,"sku":"902.536UK","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/902536UK_0.jpg?v=1785048675","url":"https:\/\/niori.co.uk\/products\/qtx-qt6-6-5-replacement-woofer-driver","provider":"Niori","version":"1.0","type":"link"}