{"product_id":"qtx-qr10-replacement-driver-10-vented-chassis-speaker","title":"QTX QR10 Replacement Driver, 10\" Vented Chassis Speaker","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is the 10\" replacement driver for the QTX QR10 passive cabinet. It is part of our QR Passive Series range, made to swap in as the main driver when the original has worn out or been damaged. If you run QR10 cabinets and need to get them working again, this is the part you fit.\u003c\/p\u003e\n\u003cp\u003eThe driver uses vented magnets, which help keep the motor assembly cool during longer sessions and heavier use. It connects using spade terminals, so wiring it in is straightforward once you have the old unit out. The impedance is 8 Ohms, matching the standard rating for the QR10 cabinet so the load stays right for your amplifier.\u003c\/p\u003e\n\u003cp\u003eFitting a fresh driver is usually cheaper than replacing a whole cabinet, and it keeps a working speaker in service rather than sending it to waste. Note that this driver is designed specifically for the QR10, so check you have the correct size for your model before ordering. Other sizes in the QR Passive Series cover the rest of the QR range, and each one matches its own cabinet. If you are unsure which driver suits your setup, get in touch and we will help you find the right one.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.85KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e108mm x 255mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e52mm (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPL @ 1W\/1m\u003c\/td\u003e\n\u003ctd\u003e95dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet weight\u003c\/td\u003e\n\u003ctd\u003e0.85KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e50Hz - 6kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e25cm (10\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet size\u003c\/td\u003e\n\u003ctd\u003e120mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rms\u003c\/td\u003e\n\u003ctd\u003e150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower max.\u003c\/td\u003e\n\u003ctd\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cabinet does this driver fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is the 10\" main driver for the QTX QR10 passive cabinet. Check your model number before ordering, as other sizes suit different QR cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver is rated at 8 Ohms, matching the standard load for the QR10 cabinet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses spade terminals, so you can wire it in once the old driver is removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are vented magnets for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe vented magnet design helps keep the motor assembly cooler during longer or heavier use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace just the driver rather than the whole cabinet?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Swapping the driver is usually cheaper than buying a new cabinet and keeps your existing speaker in use.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272101519627,"sku":"902.524UK","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/902524UK_0.jpg?v=1785048546","url":"https:\/\/niori.co.uk\/products\/qtx-qr10-replacement-driver-10-vented-chassis-speaker","provider":"Niori","version":"1.0","type":"link"}