{"product_id":"qtx-passive-crossover-250w-8-ohm-4khz-network","title":"QTX Passive Crossover 250W 8 Ohm 4kHz Network","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis QTX passive crossover is a replacement network for full-range 8 Ohm passive speaker cabinets. It handles a nominal 250W of power and splits the signal at a crossover frequency of 4kHz, sending the right frequencies to the right drivers so your cabinet plays back cleanly across its range.\u003c\/p\u003e\n\u003cp\u003eWe supply it as a direct fit for a few QTX cabinets: the QS12A (178.565), the QR8 (178.210) and the QR10 (178.211). If you have opened one of these up and found a failed or damaged crossover (sometimes called a crossover network or filter board), this is the part you need to get things working again. It wires in place of the original board, so you keep the cabinet's intended tuning rather than guessing at a substitute.\u003c\/p\u003e\n\u003cp\u003eThe board itself is compact at 25 x 75 x 55mm and weighs just 0.05kg, so it fits neatly inside the cabinet without taking up much room. Fitting is a straightforward job for anyone comfortable with basic speaker wiring, though we would always suggest matching the impedance and power rating to your cabinet before you start. At 8 ohms and 250W, this crossover is built for the QTX models listed above, and using the correct part keeps your speaker sounding the way it was designed to.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : nominal\u003c\/td\u003e\n\u003ctd\u003e250W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover frequency\u003c\/td\u003e\n\u003ctd\u003e4kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25mm x 75mm x 55mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.05KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cabinets is this crossover for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is designed as a replacement for the QTX QS12A (178.565), QR8 (178.210) and QR10 (178.211) passive cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the crossover frequency?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe crossover point is 4kHz, splitting the signal between the drivers in a full-range 8 Ohm cabinet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power rating does it handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a nominal power handling of 250W, matched to the QTX cabinets it fits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is this crossover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is rated at 8 ohms, so it should only be used with 8 Ohm cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big is the board?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 25 x 75 x 55mm and weighs 0.05kg, so it fits neatly inside the cabinet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit this myself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, it is a straightforward job if you are comfortable with basic speaker wiring. Match the impedance and power rating to your cabinet first.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272101847307,"sku":"902.533UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/902533UK_0.jpg?v=1785048653","url":"https:\/\/niori.co.uk\/products\/qtx-passive-crossover-250w-8-ohm-4khz-network","provider":"Niori","version":"1.0","type":"link"}