{"product_id":"qtx-compact-passive-crossover-4khz-250w-8-ohm-network","title":"QTX Compact Passive Crossover 4kHz 250W 8 Ohm Network","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a compact passive crossover network built as a replacement part for full-range 8 Ohm passive speaker cabinets. It handles a nominal 250W of power and splits the signal at a crossover frequency of 4kHz, sending the right frequencies to the drivers in a two-way cabinet. A crossover like this sits inside the speaker, so it does its work without any external power or setup.\u003c\/p\u003e\n\u003cp\u003eWe designed it to fit the QTX QS15A (178.569UK) and QR8A (178.202) cabinets, making it a straightforward swap if the original board has failed or been damaged. At 25 x 115 x 65mm and just 51g, it takes up very little room and mounts easily inside most compact cabinet enclosures. The 8 Ohm impedance matches the cabinets it is intended for, so you can drop it in without recalculating your amplifier load.\u003c\/p\u003e\n\u003cp\u003eA passive crossover (sometimes called a crossover network) works from the amplifier signal already reaching the speaker, so there is nothing to wire to the mains and no batteries to think about. If you run QTX passive cabinets and one has gone quiet or is passing full-range signal to the wrong driver, this part gets you back up and running. Check the model numbers above before ordering to make sure it is the right fit for your cabinet.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : nominal\u003c\/td\u003e\n\u003ctd\u003e250W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover frequency\u003c\/td\u003e\n\u003ctd\u003e4kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25mm x 115mm x 65mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.05KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cabinets does this crossover fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is made for the QTX QS15A (178.569UK) and QR8A (178.202) passive cabinets. Please confirm your model number before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the crossover frequency?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe crossover point is 4kHz, splitting the signal between the low and high frequency drivers in a two-way cabinet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much power can it handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a nominal power handling of 250W and is rated for 8 Ohm passive cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need any power to run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is a passive crossover, so it works from the amplifier signal already reaching the speaker. There is nothing to plug in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe board measures 25 x 115 x 65mm and weighs 51g, so it fits inside most compact cabinet enclosures.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272103354635,"sku":"902.560UK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/902560UK_0.jpg?v=1785048829","url":"https:\/\/niori.co.uk\/products\/qtx-compact-passive-crossover-4khz-250w-8-ohm-network","provider":"Niori","version":"1.0","type":"link"}