{"product_id":"qtx-12-replacement-driver-for-qt12-speakers","title":"QTX 12\" Replacement Driver for QT12 Speakers","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a 12\" replacement driver (also called a chassis speaker) made for the QTX QT series. If your QT12 cabinet has taken a knock or the original driver has failed, this gives you a like-for-like part to get things working again without replacing the whole speaker.\u003c\/p\u003e\n\u003cp\u003eThe driver runs at 8 ohms impedance and connects using spade terminals, so wiring it back in is straightforward. It sits as a woofer in full-range cabinets, handling the lower and mid frequencies while the cabinet's other components take care of the top end. Because it's built to match the QT series, you don't need to worry about fit or spacing.\u003c\/p\u003e\n\u003cp\u003eWe supply this as part of our range of QTX replacement drivers, so if you run more than one QT12 you can keep spares on hand. Fitting is a job most people can manage with basic tools, and it saves the cost and hassle of buying a new cabinet outright. If you're unsure whether this is the right driver for your model, check the part number (178.409UK) against your speaker before ordering.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.83KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e121mm x 305mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e35mm (1.35\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPL @ 1W\/1m\u003c\/td\u003e\n\u003ctd\u003e93dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet weight\u003c\/td\u003e\n\u003ctd\u003e0.85KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e45Hz - 6kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e30cm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet size\u003c\/td\u003e\n\u003ctd\u003e120mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rms\u003c\/td\u003e\n\u003ctd\u003e150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower max.\u003c\/td\u003e\n\u003ctd\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich speaker does this driver fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's made for the QTX QT12 and other QT series speakers that use a 12\" woofer. Check your model against part number 178.409UK before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the impedance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver is rated at 8 ohms, matching the original QT series specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it connect?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses spade terminals, so you can wire it back in without soldering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a woofer or a full-range driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt works as a woofer in full-range speaker cabinets, handling the low and mid frequencies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit it myself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Most people can fit it with basic tools by removing the old driver and connecting the spade terminals to the new one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy more than one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's sold as a single driver, so order the quantity you need if you have several QT12 cabinets.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272103125259,"sku":"902.542UK","price":33.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/902542UK_0.jpg?v=1785048718","url":"https:\/\/niori.co.uk\/products\/qtx-12-replacement-driver-for-qt12-speakers","provider":"Niori","version":"1.0","type":"link"}