{"product_id":"ontec-s-7-2w-maintained-emergency-light-auto-test-surface-white","title":"ONTEC S 7.2W Maintained Emergency Light - Auto-Test Surface - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe ONTEC S is a maintained LED emergency light fitting that draws 7.2W and delivers 288 lumens at a crisp 5000K daylight tone. Running on a 220-240V AC supply, it stays lit during normal operation and switches to its internal battery the moment mains power fails, keeping escape routes and exit points marked. As an emergency led light it sits alongside the wider range of self-testing emergency luminaires, and the auto-test function checks the battery and lamp at set intervals without anyone needing to be on site.\u003c\/p\u003e\n\u003cp\u003eThe ONTEC S suits offices, corridors, stairwells, retail floors and similar commercial interiors where a clear illuminated escape path is required under fire safety rules. Its output is aimed at marking the route to an exit rather than lighting a room, so coverage is best judged by the spread along a corridor or above a doorway rather than by floor area. Surface mounting onto a wall or ceiling keeps installation straightforward, and the 5000K beam reads cleanly against typical signage and floor markings so the way out stays obvious in a power cut.\u003c\/p\u003e\n\u003cp\u003eBuilt from white plastic with an IP20 rating, the ONTEC S is intended for dry indoor locations and should be kept clear of damp, bathrooms and any outdoor position. The integral battery and auto-test electronics are housed within the fitting, removing the routine of manual monthly checks, and the surface-fix housing mounts directly to the structure. The white finish keeps it discreet against most ceilings and walls. Other wattages and output options sit within the Ontec emergency range for matching a scheme across a building.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e7.2W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e220-240 AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous flux\u003c\/td\u003e\n\u003ctd\u003e288 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature\u003c\/td\u003e\n\u003ctd\u003e5000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eWall Mounted, Ceiling Mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-36382-datasheet.pdf?v=1782049013\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a maintained or non-maintained emergency light?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ONTEC S is a maintained fitting, so it stays lit during normal mains operation and continues to run on its internal battery if the power fails. This makes it well suited to areas that need permanent illumination as well as emergency cover, such as corridors and stairwells.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the auto-test function do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe auto-test feature automatically checks the battery and LED at scheduled intervals, confirming the fitting will perform in a real outage. This removes the need for routine manual testing and helps keep records in line with fire safety duties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the ONTEC S be used outdoors or in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It carries an IP20 rating, which means it is rated for dry indoor use only. Keep it away from damp areas, bathrooms and any outdoor or exposed position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the fitting be cleaned?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the white plastic housing with a soft, dry or barely damp cloth once the supply is isolated, avoiding solvents or abrasive cleaners. Keeping the surface free of dust helps the 288 lumen output stay clear and unobstructed.\u003c\/p\u003e","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53195150164235,"sku":"36382","price":167.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/33818_b40bac08-c2e2-4b43-bdf6-340518bb8250.jpg?v=1782033269","url":"https:\/\/niori.co.uk\/products\/ontec-s-7-2w-maintained-emergency-light-auto-test-surface-white","provider":"Niori","version":"1.0","type":"link"}