{"product_id":"odina-single-tilt-round-downlight-gu10-white","title":"Odina Single Tilt Round Downlight GU10 - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Odina is a single tilt round downlight with a GU10 lamp fitting, housed in a die-cast aluminium bezel finished in matt white. The inner lamp holder tilts up to 25° from centre, allowing the beam to be angled towards a feature, a wall or a work surface rather than straight down. The white finish sits flush with the ceiling surface with just 6mm of projection.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential, hospitality and light commercial installation where adjustable accent lighting is needed without a visible track system, the Odina suits kitchens, living rooms, bedroom reading positions, retail displays and hallways. The 72mm cut-out diameter fits standard ceiling voids of 70mm minimum depth and the GU10 base accepts any standard GU10 LED up to 10W (sold separately), giving control over colour temperature and dimmer compatibility.\u003c\/p\u003e\n\u003cp\u003eThe die-cast aluminium construction provides structural rigidity for the tilt mechanism and heat dissipation for LED lamps, while the white powder-coated finish hides ceiling imperfections around the cut-out edge. The IP20 rating restricts the fitting to dry interior locations only. The Odina is Class I, requiring an earth connection during installation, and is compatible with Knightsbridge fire hoods where fire-rated ceilings require additional protection.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769542_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954286.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does the Odina take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting takes a standard GU10 bulb up to 10W. Bulbs are sold separately. Most installations use a GU10 LED between 5-7W at 3000K or 4000K depending on room use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmer compatibility depends on the GU10 bulb fitted. Use a dimmable GU10 LED paired with a compatible LED dimmer switch to enable dimming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 25° tilt mean in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe inner lamp holder rotates 25° from the vertical centre position, allowing the beam to be angled towards a wall, a worktop edge, or a feature rather than straight down. Once set, the tilt position stays locked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the fitting is not protected against moisture ingress and must only be installed in dry interior rooms. For bathrooms, choose a downlight with IP44 or IP65 rating.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293643170059,"sku":"ODA1TRW","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/919002_82db0759-58b0-4b69-ab34-5c3d74873aeb.jpg?v=1714661677","url":"https:\/\/niori.co.uk\/products\/odina-single-tilt-round-downlight-gu10-white","provider":"Niori","version":"1.0","type":"link"}