{"product_id":"odina-single-fixed-round-downlight-white-gu10","title":"Odina Single Fixed Round Downlight White - GU10","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge Odina is a fixed round downlight with an 82mm white die-cast aluminium bezel and a 72mm ceiling cut-out, designed for GU10 bulbs up to 10W. The fitting sits 6mm proud of the ceiling once installed, giving a low-profile finish that suits residential rooms with standard or low ceiling heights.\u003c\/p\u003e\n\u003cp\u003eDesigned for living rooms, bedrooms, hallways and kitchens where a clean recessed light point is needed without the complexity of tilt or directional adjustment, the Odina requires a minimum 70mm void depth above the ceiling for safe installation. The fitting accepts any GU10 bulb (sold separately), allowing choice of colour temperature, beam angle and dimming capability depending on the specific bulb paired with it.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coated aluminium bezel resists corrosion and blends into white or light-painted ceilings, making the fitting itself almost invisible when the light is off. The die-cast construction provides a rigid mounting for the GU10 lamp holder and distributes heat away from the bulb during operation. The IP20 rating confirms suitability for dry indoor locations but not for bathrooms or outdoor use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_4769292_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_954270.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bulb does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Odina takes a standard GU10 bulb up to 10W. Bulbs are sold separately. Most users pair this with a warm-white LED GU10 between 4-6W and 2700K-3000K for general room lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming capability depends on the GU10 bulb fitted. If you fit a dimmable GU10 LED and pair it with a compatible dimmer switch, the downlight will dim. Non-dimmable GU10 bulbs will not dim regardless of the switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 70mm void above the ceiling is required for safe installation. This allows clearance for the lamp holder, the GU10 bulb body, and thermal dissipation during operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating confirms the fitting is suitable for dry indoor locations only. For bathrooms or other wet environments, an IP65-rated downlight is required to meet UK wiring regulations for zones near water.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293642252555,"sku":"ODA1FRW","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/918978_24eef97c-011e-40b3-be85-49b1c435b18d.jpg?v=1714661667","url":"https:\/\/niori.co.uk\/products\/odina-single-fixed-round-downlight-white-gu10","provider":"Niori","version":"1.0","type":"link"}