{"product_id":"nu-x-mod-core-deluxe-mkii-modulation-pedal","title":"NU-X Mod Core Deluxe mkII Modulation Pedal","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe NU-X Mod Core Deluxe mkII builds on the original Mod Core Deluxe with new effect models, more signal routing options and extra editing features. It packs 8 modulation models into a single compact stomp box (US: stompbox), covering everything from chorus and flanger to phasing and vibrato. If you only have room for one modulation pedal on your board, this one gives you plenty of ground to cover.\u003c\/p\u003e\n\u003cp\u003eEach model has Rate and Depth controls, plus a Tweak knob that adjusts a third parameter specific to the selected effect. In Alt mode you get a further Blend adjustment for mixing wet and dry. Rate can also be set using the Tap Tempo function built into the main footswitch, with a tempo range of 50 to 200 bpm. An analogue dry signal path keeps noise low and adds zero latency, while the digital processing runs at 48kHz, 24-bit.\u003c\/p\u003e\n\u003cp\u003eRouting is flexible. You can run mono out, stereo out, or mono with a built-in send\/return loop. When using the loop there are three placement options: pre, parallel and post effect. Inputs and outputs use 6.3mm mono jacks, and firmware can be updated over USB-C. The pedal runs on an optional 9V DC adaptor (pin-negative) and draws under 120mA. It measures 122 x 72 x 47mm and weighs 270g, so it sits comfortably on most pedalboards.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e9Vdc power adaptor required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC input connection\u003c\/td\u003e\n\u003ctd\u003eDC5521 jack (for optional adaptor - pin-negative)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;120mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eRate, Depth, Tweak \u0026amp; Mod type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModes\u003c\/td\u003e\n\u003ctd\u003eST.CH, CE-1, SCF CHO, SCF FLG, SCF PM, U-VIBE CHO, U-VIBE VIB, PH-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003eInstrument in \u0026amp; Loop return (6.3mm mono jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003eOut1 \u0026amp; Out2\/Loop send (6.3mm mono jack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTempo range\u003c\/td\u003e\n\u003ctd\u003e50-200 bpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSampling format\u003c\/td\u003e\n\u003ctd\u003e48kHz, 24-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e1M Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput impedance\u003c\/td\u003e\n\u003ctd\u003e1k Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic range\u003c\/td\u003e\n\u003ctd\u003e104dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e122mm x 72mm x 47mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.27KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/173473UK_b9ff60fd-f400-4696-90ce-e0dfd2cf4776.pdf?v=1784995975\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many modulation effects does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has 8 modulation models, including chorus, flanger, phaser and vibrato variations. The full list of modes is ST.CH, CE-1, SCF CHO, SCF FLG, SCF PM, U-VIBE CHO, U-VIBE VIB and PH-100.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it work in stereo?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. You can run mono out, stereo out, or mono with the send\/return loop. Outputs use 6.3mm mono jacks (Out1 and Out2\/Loop send).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt needs a 9V DC adaptor with a pin-negative DC5521 jack, sold separately. Current consumption is under 120mA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the send\/return loop with other pedals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The loop gives you three routing options for placing other effects pre, parallel or post the modulation effect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I set the effect tempo?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can adjust the Rate using the knob or the Tap Tempo function on the main footswitch, across a range of 50 to 200 bpm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the firmware be updated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. There's a USB-C port for firmware updates, so you can keep the pedal current as new versions are released.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271837573387,"sku":"173.473UK","price":112.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/173473UK_0.jpg?v=1784996009","url":"https:\/\/niori.co.uk\/products\/nu-x-mod-core-deluxe-mkii-modulation-pedal","provider":"Niori","version":"1.0","type":"link"}