{"product_id":"nu-x-acd-006a-9vdc-500ma-pedal-power-adaptor","title":"NU-X ACD-006A 9Vdc 500mA Pedal Power Adaptor","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe NU-X ACD-006A is a mains switch-mode power adaptor built to run 9Vdc effect pedals drawing up to 500mA. It works with NU-X pedals and most other brands, so it slots easily into an existing board without much fuss. The output is pin-negative, which matches the standard used across the majority of guitar effect pedals.\u003c\/p\u003e\n\u003cp\u003eOn the electrical side, the adaptor accepts a wide input range of 100-240Vac at 50\/60Hz, so it copes with mains supplies in the UK and abroad. The regulated 9Vdc output keeps your pedal running steadily, and the 500mA maximum gives you headroom for pedals that need a little more than the usual 100mA or so. The connector is a DC jack measuring 5.5 x 2.1mm, the common fit for most pedals. Before plugging in, it's worth checking your pedal's current draw and polarity so you know the adaptor (or wall wart, as some in the US call it) is a good match.\u003c\/p\u003e\n\u003cp\u003eThe unit measures 90 x 80 x 60mm and weighs 90g, so it stays out of the way whether you keep it on the floor or tuck it behind a board. As a single-output supply, it powers one pedal at a time, making it handy as a spare or as a straight replacement for a lost or faulty adaptor. If you're running several pedals, you'd pair each with its own supply or step up to a multi-output brick, but for a single 9Vdc pedal the ACD-006A does the job simply and reliably.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100-240Vac, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput voltage\u003c\/td\u003e\n\u003ctd\u003e9Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput current max.\u003c\/td\u003e\n\u003ctd\u003e500mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003ePin-negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e90mm x 80mm x 60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDC jack 5.5 x 2.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.09KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat polarity does the ACD-006A use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's pin-negative, which is the standard polarity for most guitar effect pedals. Check your pedal's marking to confirm it matches before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work with pedals from other brands?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It suits NU-X pedals and most other brands that need a 9Vdc supply drawing up to 500mA with a 5.5 x 2.1mm DC jack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this adaptor outside the UK?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe input range is 100-240Vac at 50\/60Hz, so it works with mains supplies in most countries. You may need a plug adaptor for the wall socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many pedals can it power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's a single-output supply, so it powers one pedal at a time. For multiple pedals you'd need a separate supply for each or a multi-output unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size is the connector?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe output uses a DC jack measuring 5.5 x 2.1mm, the common size for most 9Vdc effect pedals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the maximum current it can supply?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt delivers up to 500mA at 9Vdc, giving headroom for pedals that draw more than the typical 100mA or so.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271829971211,"sku":"173.290UK","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/173290UK_0.jpg?v=1784992897","url":"https:\/\/niori.co.uk\/products\/nu-x-acd-006a-9vdc-500ma-pedal-power-adaptor","provider":"Niori","version":"1.0","type":"link"}