{"product_id":"matt-brass-bezel-accessory-for-bt14-led-bulkhead-315mm","title":"Matt Brass Bezel Accessory for BT14 LED Bulkhead - 315mm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge matt brass bezel is a snap-fit accessory ring for the BT14 range of 14W LED bulkheads. The bezel measures 315mm in diameter with a 45mm projection from the wall or ceiling, and is moulded from polycarbonate finished in a brushed matt brass effect that mimics the appearance of satin brass metal at a fraction of the weight.\u003c\/p\u003e\n\u003cp\u003eDesigned to retrofit onto existing white BT14 bulkhead bases without re-wiring, the bezel clips over the standard white polycarbonate trim and transforms the appearance from utilitarian white to a warmer metallic finish suited to hotel corridors, heritage buildings, residential hallways and commercial lobbies where the functional bulkhead is specified but a traditional or period-appropriate finish is required. The bezel is compatible with all BT14 variants including emergency, sensor, dimmable and CCT-adjustable models.\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate construction resists impact and UV degradation better than painted metal bezels, and the matt finish hides minor surface marks and fingerprints that would show on polished brass. The bezel adds no additional depth to the bulkhead's backplate — the 45mm projection is the depth of the bezel ring itself, so total wall projection remains the same as the standard BT14 once the bezel is clipped on. The matt brass tone pairs well with other warm metal finishes in a space and provides visual continuity where satin brass or antique brass door hardware, light switches or handrails are already specified.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e315 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatt Brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3005812_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich bulkheads is this bezel compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe bezel fits all Knightsbridge BT14 14W LED bulkhead variants, including emergency, sensor, dimmable, CCT-adjustable and outdoor models. It clips over the standard white polycarbonate trim without requiring removal of the bulkhead base or any re-wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bezel suitable for outdoor use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe polycarbonate construction resists UV degradation and impact, making it suitable for sheltered outdoor locations where the BT14 bulkhead itself is rated for outdoor use. Check the IP rating of your specific BT14 model to confirm suitability for the installation environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bezel affect the light output?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The bezel is a cosmetic trim ring that clips around the outer edge of the bulkhead. It does not cover the diffuser or restrict the light output in any way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the bezel be fitted to an already-installed bulkhead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The bezel clips onto the existing white BT14 base without needing to remove the bulkhead from the ceiling or wall, making it a straightforward retrofit for changing the appearance of an existing installation.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293746913547,"sku":"BT14MBR","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/176054_c37846c5-8c7a-482c-bec3-aa19ef3896e6.jpg?v=1714663651","url":"https:\/\/niori.co.uk\/products\/matt-brass-bezel-accessory-for-bt14-led-bulkhead-315mm","provider":"Niori","version":"1.0","type":"link"}