{"product_id":"magpro-addressable-manual-call-point-en54-11-certified","title":"MagPro Addressable Manual Call Point - EN54-11 Certified","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe MagPro is an addressable manual call point certified to EN54-11-A for use in commercial, industrial and institutional fire alarm systems. The call point connects to addressable fire alarm control panels, allowing each unit to carry a unique address that identifies its exact location when activated. A built-in isolator prevents a short-circuit fault at one call point from disabling the rest of the detection loop.\u003c\/p\u003e\n\u003cp\u003eDesigned for wall mounting in corridors, stairwells, exits and fire escape routes, the MagPro uses a resettable break-glass mechanism that can be reset after activation using the supplied key, avoiding the need to replace the entire unit after a test or false alarm. The red polycarbonate housing carries the standard white 'Fire Alarm' text and directional arrows visible from both directions along a corridor.\u003c\/p\u003e\n\u003cp\u003eThe IP40 rating suits dry indoor environments such as offices, retail premises, schools, hotels and light industrial buildings. The call point measures 90mm square and projects approximately 50mm from the wall once surface-mounted on a standard back box. An optional transparent protective cover (sold separately) can be fitted over the front to prevent accidental activation in high-traffic areas while still allowing deliberate operation by lifting the cover first.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e8.64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Length (mm)\u003c\/td\u003e\n\u003ctd\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Width (mm)\u003c\/td\u003e\n\u003ctd\u003e510\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Height (mm)\u003c\/td\u003e\n\u003ctd\u003e220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_MAGPRO-CP_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_MAGPRO-CP.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 'addressable' mean in a fire alarm context?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAddressable call points connect to a two-wire loop on the fire alarm control panel, with each call point carrying a unique address (typically 1-255). When activated, the panel identifies exactly which call point was triggered rather than just which zone, helping responders locate the source of the alarm faster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the call point be reset after activation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The MagPro uses a resettable mechanism that can be reset using the supplied key after the break-glass element has been activated. This avoids replacing the entire unit after testing or false alarms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the built-in isolator for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe isolator prevents a short-circuit fault at this call point from disabling other devices on the same detection loop. If a wiring fault occurs at this location, the isolator cuts off the fault while allowing the rest of the loop to continue operating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the protective cover included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The optional transparent protective cover is sold separately. It fits over the front of the call point to prevent accidental activation while still allowing deliberate operation by lifting the cover first.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294133412107,"sku":"MAGPRO-CP","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/MAGPRO-CP_f70fbf75-a540-4629-987b-6cdca45e3e02.jpg?v=1714668465","url":"https:\/\/niori.co.uk\/products\/magpro-addressable-manual-call-point-en54-11-certified","provider":"Niori","version":"1.0","type":"link"}