{"product_id":"magpro-addressable-base-sounder-esp-fire-alarm","title":"MagPro Addressable Base Sounder - ESP Fire Alarm","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe MagPro addressable base sounder is a fire alarm component that combines a detector mounting base with an integrated sounder module, allowing a single ceiling point to provide both smoke\/heat detection and audible alarm notification. The base accepts ESP MagPro detector heads (MAGPRO-SD1 smoke detector, MAGPRO-HD1 heat detector, and MAGPRO-HSD1 combined smoke and heat detector) and connects to addressable fire alarm loop wiring via screw terminals on the base.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial fire alarm installations where dedicated sounder points would be impractical or where ceiling space is limited, the addressable base sounder reduces the number of separate devices needed per zone. The sounder element is controlled via the addressable protocol, allowing the fire panel to activate specific bases independently rather than triggering all sounders on a circuit simultaneously. This gives zone-specific or phased evacuation control depending on panel programming.\u003c\/p\u003e\n\u003cp\u003eThe white thermoplastic base measures approximately 100mm diameter with heat dissipation fins around the top edge. The green circuit board visible in the base houses the addressable interface and sounder driver. Installation requires standard ceiling back box mounting and loop wiring to the panel, with the detector head twisting onto the base once wiring is complete. The 0.15kg weight is light enough for single-person ceiling installation on most commercial ceiling grids.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e15.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Length (mm)\u003c\/td\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Width (mm)\u003c\/td\u003e\n\u003ctd\u003e560\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Height (mm)\u003c\/td\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_MAGPRO-DBS_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_MAGPRO-DBS.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich detector heads are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe base accepts ESP MagPro MAGPRO-SD1 (smoke detector), MAGPRO-HD1 (heat detector), and MAGPRO-HSD1 (combined smoke and heat detector) heads. The detector head twists onto the base after wiring is complete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the sounder controlled?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe sounder is controlled via the addressable fire alarm protocol. The fire panel can activate specific base sounders independently, allowing zone-specific or phased evacuation rather than triggering all sounders simultaneously.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat wiring is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe base connects to addressable loop wiring using screw terminals. Wiring specifications and loop configuration details are provided in the installation manual linked above. Installation must be carried out by a qualified fire alarm engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this replace a standard detector base?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, if the fire panel supports addressable sounder bases. The MagPro addressable base sounder occupies the same ceiling footprint as a standard detector base but adds audible alarm capability, reducing the need for separate sounder points in the zone.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294134034699,"sku":"MAGPRO-DBS","price":36.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/MAGPRO-DBS_15769177-9bbd-4f51-a582-3ec00b4f7f17.jpg?v=1714668490","url":"https:\/\/niori.co.uk\/products\/magpro-addressable-base-sounder-esp-fire-alarm","provider":"Niori","version":"1.0","type":"link"}