{"product_id":"magfire-led-indicator-flush-plate-fire-detector-activated","title":"MAGfire LED Indicator Flush Plate - Fire Detector Activated","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe ESP MAGfire LED indicator flush plate is a remote visual indicator designed for fire detection and alarm systems, displaying a red 'FIRE Detector Activated' message above a white LED indicator lens. The plate operates on 5-28V DC and draws a maximum of 28mA when the LED is illuminated, providing a permanent (non-flashing) visual alert when the connected fire detector activates.\u003c\/p\u003e\n\u003cp\u003eDesigned for commercial, industrial and residential fire alarm installations where remote indication is required, the flush plate mounts to a standard UK single-gang back box and provides visual confirmation of detector activation in locations away from the detector itself. This is particularly useful in corridor zones, reception areas, stairwells and plant rooms where building occupants or maintenance staff need immediate visual confirmation of which zone has been triggered without accessing the main control panel.\u003c\/p\u003e\n\u003cp\u003eThe white ABS housing measures 86mm square with a low-profile depth suitable for standard 25mm back boxes, and the red LED text panel sits above a concentric Fresnel-pattern indicator lens that diffuses the LED output evenly across the faceplate. The two mounting holes on the left and right edges accept standard electrical accessory screws for secure fixing. At 50g net weight the plate adds negligible load to the back box and can be installed on plasterboard or masonry surfaces.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Length (mm)\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Width (mm)\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Height (mm)\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_ZRL2_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_ZRL2.pdf\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat voltage does the MAGfire operate on?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe indicator operates on 5-28V DC, making it compatible with most commercial and residential fire alarm control panels. The maximum current draw is 28mA when the LED is active.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the LED flash or stay on permanently?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LED provides permanent (non-flashing) illumination when activated. This gives continuous visual confirmation that a detector has been triggered rather than a periodic flash pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat back box is required for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe flush plate fits a standard UK single-gang 25mm minimum depth back box. The plate measures 86mm square and uses conventional electrical accessory screw fixings on the left and right mounting points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used as a standalone fire indicator?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The MAGfire is a remote indicator designed to be wired into an existing fire detection system. It displays the activation status of connected detectors but does not detect fire or smoke itself.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294080262411,"sku":"ZRL2","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/ZRL2_53d016a5-fda5-4161-8963-704d2b501be7.jpg?v=1714667845","url":"https:\/\/niori.co.uk\/products\/magfire-led-indicator-flush-plate-fire-detector-activated","provider":"Niori","version":"1.0","type":"link"}