{"product_id":"lyyt-recessed-led-strip-profile-2m-aluminium","title":"LYYT Recessed LED Strip Profile 2m - Aluminium","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT recessed LED strip profile is a 2m aluminium channel designed to sit flush with the surface into which it's installed, concealing LED tape behind an 11mm-wide snap-fit diffuser. The external cross-section measures 22mm x 6mm, with an internal channel of 11mm x 4mm to house LED strip tape up to 10mm wide.\u003c\/p\u003e\n\u003cp\u003eDesigned for under-cabinet lighting, shelving accent lighting, and architectural inlays where the fitting itself should be invisible, the recessed format sits within a routed groove or rebate in wood, MDF or plasterboard. The diffuser clips into the channel and sits flush with the surrounding surface once installed, creating a continuous line of light without visible hardware. The aluminium extrusion acts as a heat sink for the LED tape, extending diode lifespan and preventing thermal degradation of adhesives.\u003c\/p\u003e\n\u003cp\u003eThe profile is supplied in a single 2m length with end caps and mounting clips. It can be cut to length on-site using a hacksaw or mitre saw to match cabinet widths or shelf runs. The 11mm visible width of the diffuser makes it suitable for minimalist and contemporary installations where a narrow light slot is preferred over a wider diffused channel. The snap-fit diffuser can be removed for cleaning or LED tape replacement without removing the entire extrusion from the installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal cross-section\u003c\/td\u003e\n\u003ctd\u003e22 x 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal cross-section\u003c\/td\u003e\n\u003ctd\u003e11 x 4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser visible width\u003c\/td\u003e\n\u003ctd\u003e11mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat depth of groove is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile requires a routed groove 22mm wide and at least 6mm deep to sit flush with the surface. For clean installation, route the groove 23mm wide to allow fitting tolerance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width of LED tape does it accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal channel measures 11mm x 4mm, so LED strip tape up to 10mm wide and 3mm thick will fit comfortably. Standard 8mm and 10mm LED tape is compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the profile be cut to length?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 2m extrusion can be cut to length using a hacksaw or fine-tooth mitre saw blade. Cut ends should be deburred before fitting end caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the diffuser removable after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The diffuser snaps into the channel and can be removed for cleaning or LED tape replacement without removing the aluminium extrusion from the routed groove.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313204257035,"sku":"156.813UK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156813UK_LD1_0a0638ac-4828-4b5d-b560-585ea7ced24b.jpg?v=1715189183","url":"https:\/\/niori.co.uk\/products\/lyyt-recessed-led-strip-profile-2m-aluminium","provider":"Niori","version":"1.0","type":"link"}