{"product_id":"lyyt-recessed-led-profile-2m-ip68-waterproof-aluminium","title":"LYYT Recessed LED Profile 2m IP68 Waterproof - Aluminium","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT recessed LED profile is a 2m aluminium channel designed for flush-mounting LED tape into walls, ceilings or floors in moisture-exposed environments. The profile accepts LED tape up to 12mm wide and 4mm thick within its internal cavity, and ships with a knock-in frosted diffuser held by an IP68-rated seal that prevents water ingress when installed correctly.\u003c\/p\u003e\n\u003cp\u003eDesigned for architectural installations where the LED source needs to sit level with the mounting surface rather than projecting from it, the profile is routed into the substrate during installation so only the 18mm-wide diffuser remains visible once fitted. This makes it suitable for wet rooms, bathroom floors, exterior decking perimeters, kitchen plinths and commercial lobby floors where both water resistance and a flush finish are required. The bevel-edged diffuser sits fractionally proud of the aluminium channel to allow for surface-level cleaning without catching mop heads or floor scrapers.\u003c\/p\u003e\n\u003cp\u003eThe 2m length ships as a single extrusion and can be cut to size on site with a hacksaw or mitre saw. The aluminium body dissipates heat from the LED tape into the substrate, which is particularly useful when the profile is recessed into masonry or timber where the surrounding material acts as additional heatsinking. The IP68 rating means the profile can handle temporary submersion up to 1m depth, though it is primarily intended for splash zones and surface water exposure rather than permanent underwater use.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal cross-section\u003c\/td\u003e\n\u003ctd\u003e28 x 11mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal cross-section\u003c\/td\u003e\n\u003ctd\u003e12 x 4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiffuser visible width\u003c\/td\u003e\n\u003ctd\u003e18mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat width LED tape does this profile accept?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal cavity measures 12.2mm wide by 4mm deep, so it accepts LED tape up to 12mm width. Most standard 10mm and 12mm LED tapes fit, but measure your specific tape before ordering to confirm clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the profile suitable for outdoor decking?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The IP68 rating means it can handle surface water, rain and temporary submersion. For decking perimeters or step nosings, ensure the profile is recessed flush and that drainage prevents prolonged standing water over the diffuser.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 2m length be cut to size?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The aluminium extrusion can be cut with a hacksaw or mitre saw to fit the required run length. Cut ends will need to be sealed with end caps (sold separately) to maintain the IP68 rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat depth of recess is needed for installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe profile is 11mm deep, so a minimum 12mm recess depth is needed to allow the diffuser to sit flush with the mounting surface. Allow an additional 2-3mm clearance beneath the profile for cable routing.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313558937867,"sku":"156.851UK","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156851UK_LD1_e29c7de0-fbb0-4a2d-98d5-a3849e1c9768.jpg?v=1715196089","url":"https:\/\/niori.co.uk\/products\/lyyt-recessed-led-profile-2m-ip68-waterproof-aluminium","provider":"Niori","version":"1.0","type":"link"}