{"product_id":"lyyt-diy-rgb-flexible-link-connector-150mm-5-pack","title":"LYYT DIY RGB Flexible Link Connector 150mm - 5 Pack","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT DIY RGB Flexible Link is a 150mm solderless connector for 10mm RGB LED strip tape, supplied in packs of five. Each link carries four colour-coded cores (red, green, blue, black) between two white snap-fit terminal blocks that clip directly onto the connection pads of standard RGB LED tape. The snap connectors eliminate the need for soldering, reducing installation time and making the links accessible to installers working without specialist equipment.\u003c\/p\u003e\n\u003cp\u003eDesigned for extending LED tape runs around corners, across gaps, or between non-adjacent surfaces, the flexible 150mm cable length allows routing around obstacles, door frames, and furniture edges without breaking the lighting circuit. The links suit residential mood lighting installations, gaming setups where RGB tape follows desk edges or monitor backs, retail display cases, bar counters, and hospitality feature lighting. The IP20 rating restricts use to dry indoor locations only.\u003c\/p\u003e\n\u003cp\u003eEach connector weighs 5g and measures 165mm total length including the terminal blocks, with the cable itself providing 150mm of flexible routing distance. The four-core construction maintains separate signal paths for red, green and blue channels plus a common negative (black), preventing colour cross-contamination and ensuring accurate colour mixing when controlled by an RGB driver or controller. The white terminal housings are compact enough to tuck behind skirting boards, under shelving lips, or within shallow cable channels during installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire length\u003c\/td\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTape version\u003c\/td\u003e\n\u003ctd\u003e10mm RGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCores\u003c\/td\u003e\n\u003ctd\u003e4 (blue, red, green, black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (each)\u003c\/td\u003e\n\u003ctd\u003e5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (each)\u003c\/td\u003e\n\u003ctd\u003e165 x 15 x 5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED tape width do these connectors fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe snap-fit terminals are designed for standard 10mm wide RGB LED tape. They will not fit single-colour tape, RGBW tape, or narrower\/wider strip profiles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan these be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means these connectors are not protected against moisture or dust ingress and must only be used in dry indoor locations. For outdoor or bathroom installations, IP65 or IP67 rated connectors are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the connectors require soldering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The white terminal blocks snap directly onto the copper connection pads on the LED tape. No soldering tools or skills are needed for installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan multiple links be chained together?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but be aware of voltage drop. Each additional connector and cable run adds resistance to the circuit. For runs longer than 5m of combined tape and cable, consider injecting power at multiple points along the run to maintain consistent brightness and colour.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313190396171,"sku":"156.148UK","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156148UK_CO1_a66ccecb-b885-49ca-beab-56ce5a51df58.jpg?v=1715189026","url":"https:\/\/niori.co.uk\/products\/lyyt-diy-rgb-flexible-link-connector-150mm-5-pack","provider":"Niori","version":"1.0","type":"link"}