{"product_id":"lyyt-12v-dc-5a-indoor-power-supply-led-driver-1-2m-hard-wired-lead","title":"LYYT 12V DC 5A Indoor Power Supply LED Driver - 1.2m Hard-Wired Lead","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 12V DC indoor power supply delivers up to 5A continuous output through a 1.2m hard-wired lead terminated with a 5.5 x 2.1mm centre-positive DC plug. The unit accepts 100-240Vac mains input via a detachable UK figure-8 lead, making it suitable for powering 12V LED tape runs, CCTV cameras, access control panels and similar fixed installations requiring regulated DC power.\u003c\/p\u003e\n\u003cp\u003eDesigned for permanent indoor installation, the sealed enclosure measures 118 x 50 x 32mm and carries an IP20 rating, meaning it provides basic protection against solid objects larger than 12.5mm but is not moisture-resistant. The 1.2m output lead allows the PSU to be positioned away from the powered device where space or heat dissipation requires it, while the detachable mains lead simplifies cable routing during installation.\u003c\/p\u003e\n\u003cp\u003eThe 5A maximum output supports LED tape runs up to 60W total power draw, or multiple lower-power devices wired in parallel to the same DC plug. The centre-positive polarity is standard for most 12V DC equipment, but reverse-polarity equipment will require an adapter or different PSU. At 214g the unit can be cable-tied or velcro-mounted behind furniture, inside AV racks or under worktops without needing mechanical fixing for the PSU itself.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC output\u003c\/td\u003e\n\u003ctd\u003e5.5 x 2.1mm DC plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead length\u003c\/td\u003e\n\u003ctd\u003e1.2m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e100-240Vac, 47\/63Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eCentre positive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent max.\u003c\/td\u003e\n\u003ctd\u003e5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e118 x 50 x 32mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e214g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length of LED tape can this power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 5A maximum output, the PSU supports up to 60W of 12V LED tape (5A x 12V = 60W). Most 12V LED tape draws between 4.8W and 14.4W per metre depending on LED density, so this PSU can power approximately 4-12 metres of tape on a single run. Always check the specific tape wattage per metre before connecting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the unit has no moisture protection and must be installed indoors in a dry location. For outdoor 12V DC applications, use an IP65 or IP67 rated power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the polarity compatible with all 12V devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PSU outputs centre-positive polarity, which is the standard for most 12V DC equipment including LED tape, CCTV cameras and access control panels. Some audio or vintage equipment uses centre-negative polarity and will require a different PSU or a polarity adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the mains lead be replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The PSU uses a detachable figure-8 (IEC C7) mains lead, which can be unplugged and replaced with a longer lead if needed during installation.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313459323147,"sku":"660.454UK","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/660454UK_CO1_be6bf351-4ed4-4960-9026-85eaa76e6361.jpg?v=1715193459","url":"https:\/\/niori.co.uk\/products\/lyyt-12v-dc-5a-indoor-power-supply-led-driver-1-2m-hard-wired-lead","provider":"Niori","version":"1.0","type":"link"}