{"product_id":"lyyt-10mm-single-colour-led-strip-t-connector-5-pack","title":"LYYT 10mm Single Colour LED Strip T Connector - 5 Pack","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe LYYT 10mm single colour LED strip T connector joins two LED strips at a right angle to a third, creating a T-shaped branch in a continuous run. The snap-fit design clamps onto the copper contact pads on 10mm-wide single colour LED tape without soldering, using spring-loaded metal pins inside the connector body to maintain electrical contact.\u003c\/p\u003e\n\u003cp\u003eUsed in residential under-cabinet lighting, retail display installations and exhibition builds where LED strip runs need to branch across cabinets, shelves or architectural features. The connector accepts 10mm single colour LED tape (typically 2-pin tape with one positive and one negative contact) and locks the tape in place with a hinged cover that clips down over the copper pads. Each connector measures 50 x 32 x 3mm and weighs 2.8g.\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating limits use to dry indoor locations only — the connector is not sealed against moisture or dust ingress. The polycarbonate housing and tin-plated copper contacts provide reliable conductivity for tape runs up to typical single colour strip ratings (12V or 24V depending on the tape used). Five connectors per pack allows multiple branches in a single installation without needing to order individual connectors.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTape version\u003c\/td\u003e\n\u003ctd\u003e10mm single colour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e50 x 32 x 3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.8g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this work with RGB or RGBW LED strip?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This connector is for single colour LED strip only (10mm wide, 2-pin). RGB and RGBW strips require connectors with 4 or 5 pins to carry separate colour channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs soldering required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The connector uses a snap-fit design with spring-loaded pins that clamp onto the copper pads on the LED strip when the hinged cover is closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating means the connector is not sealed against moisture or dust and is suitable for dry indoor locations only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat voltage LED strip does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is passive — it simply joins the copper contacts on the LED strip. It will work with any voltage single colour strip (typically 12V or 24V) as long as the strip is 10mm wide with standard 2-pin contact spacing.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":45313190002955,"sku":"156.143UK","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/156143UK_CO1_d738eae9-1eed-44a8-8f5a-1affbb1b9c9f.jpg?v=1715189011","url":"https:\/\/niori.co.uk\/products\/lyyt-10mm-single-colour-led-strip-t-connector-5-pack","provider":"Niori","version":"1.0","type":"link"}