{"product_id":"luxeon-100w-48v-constant-voltage-magnetic-led-driver-ip20-black","title":"Luxeon 100W 48V Constant Voltage Magnetic LED Driver - IP20 Black","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Luxeon is a 100W constant voltage magnetic LED driver delivering regulated 48V DC output for low-voltage LED lighting installations. The driver sits in a 297mm black metal housing with an IP20 rating for indoor use, and connects to mains via a 2000mm cable with a moulded plug. Magnetic transformers convert 230V AC to stable 48V DC without electronic switching noise, making them compatible with older dimmer systems where electronic drivers often fail.\u003c\/p\u003e\n\u003cp\u003eDesigned for LED strip lighting, under-cabinet installations, architectural cove lighting and commercial display cases requiring continuous 48V power, the Luxeon provides consistent output under varying mains conditions. The 100W capacity supports up to 20 metres of 5W\/m LED tape or 10 metres of 10W\/m tape when load is distributed evenly across the driver output. The slim 16mm projection allows mounting in tight ceiling voids, under cabinets or behind pelmet boards where depth is constrained.\u003c\/p\u003e\n\u003cp\u003eThe constant voltage output holds 48V steady regardless of LED load variation, preventing brightness fluctuations as different sections of tape are switched on or off. The black metal housing dissipates heat passively without fans, making the driver silent in operation. The 2000mm input cable allows the driver to be positioned away from the LED installation point, with low-voltage output cabling run separately to the tape or strip.\u003c\/p\u003e\n\u003cp\u003eIdeal Lux backs the driver with a 5-year warranty. The IP20 rating restricts use to dry indoor environments — bathrooms, kitchens and outdoor applications require a higher IP rating. The driver is non-dimmable in its standard configuration; dimming requires a compatible mains-side dimmer installed before the driver input.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e297\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length (mm)\u003c\/td\u003e\n\u003ctd\u003e2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb Type\u003c\/td\u003e\n\u003ctd\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length of LED tape can this driver power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 100W capacity supports up to 20 metres of 5W\/m LED tape or 10 metres of 10W\/m tape at 48V, assuming the load is distributed evenly. Higher-wattage tape reduces the total length proportionally. Calculate total wattage by multiplying tape length by watts per metre and ensure it stays below 100W.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this driver be used in bathrooms or kitchens?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating provides protection against solid objects larger than 12.5mm but offers no moisture protection. Bathrooms, kitchens and any damp environments require an IP44-rated driver minimum, and outdoor use requires IP65 or higher.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the driver dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver itself is non-dimmable in its standard form. Dimming requires a compatible mains-side phase-cut dimmer installed before the driver input. Magnetic drivers are generally more tolerant of older dimmer types than electronic drivers, but compatibility should be verified before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy use a magnetic driver instead of an electronic one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMagnetic drivers convert voltage using a wound transformer rather than electronic switching circuits. This makes them quieter (no high-frequency switching noise), more tolerant of older dimmer systems, and often longer-lasting in installations where reliability is prioritised over compact size or efficiency.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733267898635,"sku":"296302","price":75.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/296302_WEB001_EGO_MAGNETIC_DRIVER_100W_48V_BK_efce613d-5512-4c01-b333-c2ac02f30485.jpg?v=1724721363","url":"https:\/\/niori.co.uk\/products\/luxeon-100w-48v-constant-voltage-magnetic-led-driver-ip20-black","provider":"Niori","version":"1.0","type":"link"}