{"product_id":"luto-ctx-80-round-mr16-recessed-downlight-white","title":"Luto CTX Ø80 Round MR16 Recessed Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Luto CTX is a compact round recessed downlight built around a single MR16 lamp on a Gx5.3 cap, drawing up to 10W at low voltage (12V AC or DC). In US terms it sits in the recessed can light family, though this is a slim trim-and-lamp fitting rather than a deep housing, dropping flush into the ceiling for a clean, unobtrusive light point. The lamp is supplied separately, so the beam spread, brightness and colour temperature follow whichever MR16 you fit, giving you control over the look from a focused accent to a wider wash.\u003c\/p\u003e\n\u003cp\u003eIts small Ø85mm face and shallow 25mm depth suit ceilings with limited void space, including hallways, landings, alcoves and shelf recesses where a larger downlight will not fit. Several units spaced in a line or grid work well for general or accent lighting across a room, with the exact spacing and output set by the MR16 lamps you choose. Being an IP20 fitting, it is for dry indoor rooms only and should be kept clear of bathrooms, porches and any damp or exposed location.\u003c\/p\u003e\n\u003cp\u003eThe body is aluminium alloy in a white finish, sized for a neat recessed fit in the ceiling with the lamp held in the Gx5.3 holder. It runs on low voltage, so it needs a 12V transformer or driver sized to the lamp load rather than connecting direct to mains. At just 48g it is light to handle during install, and the trim wipes clean with a soft dry cloth. The Luto range includes further recessed fittings in matching finishes to keep a run of downlights consistent.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003emax 10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12 AC; 12 DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eRecessed Mount In The Ceiling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap \/ base\u003c\/td\u003e\n\u003ctd\u003eGx5.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003eMR16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShape\u003c\/td\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eØ85 × 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e48 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminium Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-2580-spec.pdf?v=1782048962\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-2580-datasheet.pdf?v=1782048962\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size cut-out does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting has an outer face diameter of Ø85mm, so the ceiling cut-out is the recess hole the body drops into, slightly smaller than this outer trim. Always check the lamp clearance and your ceiling void before cutting, as the fitting needs around 25mm of depth behind the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the MR16 lamp?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the lamp is supplied separately. It takes a standard MR16 lamp on a Gx5.3 cap rated up to 10W, which lets you pick the beam angle, brightness and colour temperature to suit the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need a transformer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It runs on low voltage at 12V AC or DC, so it must be wired through a 12V transformer or driver rated for the total lamp load rather than connected straight to mains.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I clean the fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the white trim with a soft, dry or lightly damp cloth once the light is off and cool. Avoid solvents or abrasive cleaners, which can mark the finish.\u003c\/p\u003e","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53195094688011,"sku":"2580","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/2580.jpg?v=1782032342","url":"https:\/\/niori.co.uk\/products\/luto-ctx-80-round-mr16-recessed-downlight-white","provider":"Niori","version":"1.0","type":"link"}