{"product_id":"knightsbridge-undkit-6-way-connector-white","title":"Knightsbridge UNDKIT 6-Way Connector - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge UNDKIT 6-way connector is a compact polycarbonate junction box that links up to six undercabinet lights from the UNDKIT range on a single circuit. The white moulded housing measures 51mm × 31mm × 16.5mm and accepts six individual cable runs from UNDKIT LED strip lights or puck lights, joining them to a single driver output.\u003c\/p\u003e\n\u003cp\u003eDesigned for kitchen cabinet installations where multiple lights need to be controlled from one driver or switch, the connector sits behind or inside cabinet runs where the connection point needs to split. The IP20 rating suits dry indoor locations, with the polycarbonate case providing insulation and strain relief for the cable entries. Class III construction means the connector operates on extra-low voltage (typically 12V or 24V DC from the UNDKIT driver) with no exposed metal parts that could carry mains voltage.\u003c\/p\u003e\n\u003cp\u003eThe white finish matches the UNDKIT driver housings and cable sheaths, keeping the installation visually consistent when any part of the run is visible. The six-port layout allows for symmetrical cabinet runs — three lights on each side of a kitchen, or two runs of three lights feeding different zones. The connector clips or adheres to the underside of cabinets using the base mounting points, keeping cables organised and preventing strain on individual solder points.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e51 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e16.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e31 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eIII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3552740_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_896162.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat UNDKIT products does this connector work with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 6-way connector is designed specifically for Knightsbridge UNDKIT undercabinet LED lights, including both strip and puck variants from the range. It joins the low-voltage cable runs from individual lights to a single driver output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat voltage does the connector handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector is Class III rated for extra-low voltage DC circuits, typically 12V or 24V depending on the UNDKIT driver specification. It does not carry or switch mains voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use all six ports or just some of them?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can use any number of the six ports depending on your installation needs. Unused ports are left empty — there is no need to cap or terminate them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere should the connector be mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe connector should be mounted in a dry location behind or inside cabinet runs, away from direct moisture. The IP20 rating means it is not suitable for bathroom zones or outdoor use.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294019969291,"sku":"UNDKCON","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/233574_122adb62-5200-4c5e-a8fa-bab126ecaa36.jpg?v=1714667342","url":"https:\/\/niori.co.uk\/products\/knightsbridge-undkit-6-way-connector-white","provider":"Niori","version":"1.0","type":"link"}