{"product_id":"knightsbridge-12w-24v-constant-voltage-led-driver-non-dimmable","title":"Knightsbridge 12W 24V Constant Voltage LED Driver - Non-Dimmable","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge 24VDCA is a 12W constant voltage LED driver that converts 230V 50Hz mains input to a regulated 24V DC output at 0.50A. Housed in a red polycarbonate case measuring 98mm x 36mm x 22mm, the driver is designed for permanent installation behind fittings, inside false ceilings, or within control enclosures where IP20 protection is sufficient.\u003c\/p\u003e\n\u003cp\u003eConstant voltage drivers suit LED strip lighting, LED tape, and multi-point LED installations where several low-voltage fittings run from a single transformer. The 24V output remains stable across the load range, preventing brightness fluctuation as LEDs are switched on or off downstream. The driver is non-dimmable and rated for indoor dry locations only — bathrooms, outdoor applications, and wet environments require a higher IP-rated alternative.\u003c\/p\u003e\n\u003cp\u003eThe Class II construction means the driver has double or reinforced insulation and does not require an earth connection, simplifying installation in retrofit situations where earthing is absent or unreliable. The polycarbonate housing provides impact resistance and thermal management, with ventilation slots allowing passive cooling during continuous operation. Maximum ambient temperature is 50°C, and the driver includes overload and short-circuit protection to prevent damage if the output is accidentally shorted.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e98 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e36 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver Type\u003c\/td\u003e\n\u003ctd\u003eConstant Voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_893540_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between constant voltage and constant current drivers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConstant voltage drivers output a fixed voltage (24V in this case) and allow the current to vary depending on the connected load. They suit LED strip and tape where multiple LEDs are wired in parallel. Constant current drivers output a fixed current and allow voltage to vary, and they suit single high-power LEDs or series-wired LED arrays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this driver be used with dimmers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 24VDCA is non-dimmable. Pairing it with a mains dimmer will cause flicker, premature failure, or no output at all. If dimming is required, choose a dimmable constant voltage driver from the Knightsbridge range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can the driver be installed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IP20 rating means the driver is suitable for dry indoor locations only. Typical installation points include false ceilings above LED strip, inside kitchen plinths for plinth lighting, behind mirrors with integrated LED tape, or within control panels. It cannot be used in bathrooms, outdoors, or anywhere subject to moisture or condensation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size LED load can it power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 12W output at 24V delivers 0.50A maximum current. Total connected LED load must not exceed 12W. For example, 1m of 9.6W\/m LED tape would be acceptable, but 2m of the same tape (19.2W total) would exceed the driver's capacity and require a higher-wattage model.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293733773579,"sku":"24VDCA","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/232868_f3e60074-80cb-41f2-9c01-f7da6fa4d9cf.jpg?v=1714663472","url":"https:\/\/niori.co.uk\/products\/knightsbridge-12w-24v-constant-voltage-led-driver-non-dimmable","provider":"Niori","version":"1.0","type":"link"}