{"product_id":"ip65-fire-rated-fixed-downlight-white","title":"IP65 Fire Rated Fixed Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a fixed round downlight with a white bezel and a black rear housing, rated IP65 and fire rated as printed on the pack. The bezel is plain and slightly domed, with no visible screws on the face, and the housing behind it carries sprung retaining clips that squeeze in as you push the fitting up into a prepared hole and then spring out above the plasterboard to hold it. Fixed means the aperture points straight down and stays there, which is what you want for even, repeatable spacing across a ceiling rather than for picking out a particular wall or worktop.\u003c\/p\u003e\n\u003cp\u003eIP65 is the reason to choose it. That rating covers dust and jets of water, and the manufacturer states it is suitable for bathroom zones 1, 2 and 3, though not zone 0, which is the inside of the bath or shower tray itself. So it can go above a shower enclosure, over a basin, or across a bathroom ceiling in a row, and it is equally at home in a kitchen where steam and cooking grease reach the ceiling. Utility rooms and hallways suit it too. Alongside this one we stock chrome and brushed chrome downlights, including a slimline fixed version and tilt models that angle the light.\u003c\/p\u003e\n\u003cp\u003eThe pack calls it a quick fit, screwless design, and that is the practical difference: no bezel screws to align and nothing showing on the face once it is up. No wattage, brightness or colour temperature is printed for the fitting, so judge the light by the lamp you put in it and keep the same figures across a run of ceiling lights if you want them to match. It is sold singly, with a minimum order of one, so you can buy the exact number your room plan needs and add one spare.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFixed recessed downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65, suitable for bathroom zones 3, 2 and 1 only, not zone 0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire rating\u003c\/td\u003e\n\u003ctd\u003eFire rated, as stated on the retail pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit this in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is rated IP65, and the manufacturer states it suits bathroom zones 1, 2 and 3, but not zone 0, which is inside the bath or shower tray itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does fire rated actually mean here?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA fire rated downlight is built so that the hole it sits in does not undermine the fire resistance of the ceiling. The pack states this one is fire rated, and your installer will confirm it suits your ceiling build up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it hold itself in the ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprung retaining clips on the body fold in while you push the fitting up into a prepared hole, then open above the plasterboard and grip it, so nothing shows on the face.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat cut-out size should I make?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo cut-out figure is printed for this downlight, so measure the rear housing against your planned hole before cutting, and allow clearance above the ceiling for the body and its cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeither the specification nor the pack says, so treat dimming as unconfirmed. With a downlight of this type, dimming normally depends on the lamp fitted and the switch paired with it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I angle the beam towards a wall?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this one is fixed and the aperture points straight down. If you need to aim light at a wall or a worktop, the tilt downlights we stock do that instead.\u003c\/p\u003e","brand":"PowerMaster","offers":[{"title":"Default Title","offer_id":53385927295243,"sku":"S6593","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S6593_02.jpg?v=1790252161","url":"https:\/\/niori.co.uk\/products\/ip65-fire-rated-fixed-downlight-white","provider":"Niori","version":"1.0","type":"link"}