{"product_id":"gu10-recessed-tilt-downlight-brass-twist-lock","title":"GU10 Recessed Tilt Downlight Brass Twist \u0026 Lock","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge GU10 recessed tilt downlight combines a brass-finished bezel with a 25-degree tilt mechanism and a twist-lock fitting for fast ceiling installation. The die-cast aluminium housing sits flush in the ceiling with a 2.5mm projection from the bezel face, and the inner lamp holder tilts to direct light onto walls, artwork or architectural features rather than straight downward.\u003c\/p\u003e\n\u003cp\u003eDesigned for general residential and commercial lighting where directional accent is needed, the downlight fits an 80mm cut-out and requires a minimum 150mm void depth above the ceiling. The twist-lock mechanism allows the fitting to be installed and removed without tools by rotating the housing into spring-loaded retention clips fixed to the ceiling aperture. The pre-wired GU10 lamp holder accepts standard GU10 LED or halogen bulbs up to 50W (sold separately), and an MR16 lamp holder is supplied as an alternative for low-voltage installations.\u003c\/p\u003e\n\u003cp\u003eThe brass finish on the bezel provides a warm metallic accent that pairs with traditional and warm-toned interiors. The IP20 rating limits the downlight to dry internal locations — it is not suitable for bathrooms, shower rooms or outdoor use. Dimmability depends on the bulb chosen; most LED GU10 bulbs now support dimming, but compatibility should be checked against the specific dimmer model before installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e98 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Void\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e25 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eDie-cast aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\/MR16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1416670_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_776164.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling void depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum 150mm void above the ceiling is needed to accommodate the 98mm recessed depth of the housing plus clearance for the lamp and wiring. The cut-out diameter is 80mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the twist-lock mechanism work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe downlight housing rotates into spring-loaded retention clips fixed to the ceiling aperture. This allows installation and removal without screws or tools — the fitting twists to lock and unlock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating limits this downlight to dry internal locations. Bathrooms and shower rooms require IP44 or IP65-rated fittings depending on zone placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimmability depends on the bulb installed. Most modern LED GU10 bulbs support dimming, but compatibility with the specific dimmer switch should be confirmed before installation. Halogen GU10 bulbs are generally dimmable with standard resistive dimmers.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293919109387,"sku":"RD2B","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/157642_e611d7f4-e27b-4086-8140-a4d93f16ee47.jpg?v=1714666278","url":"https:\/\/niori.co.uk\/products\/gu10-recessed-tilt-downlight-brass-twist-lock","provider":"Niori","version":"1.0","type":"link"}