{"product_id":"gu10-recessed-downlight-square-ip44-60mm-cut-out-10w-max-black-talu","title":"GU10 Recessed Downlight Square IP44 60mm Cut-out 10W Max - Black Talu","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Talu recessed downlight is a square aluminium-alloy housing that drops into a 60mm ceiling cut-out and sits flush with the ceiling face. It accepts a single GU10 twist-lock lamp, which is supplied separately, so the brightness, colour and beam are set by whichever GU10 bulb you choose. The fitting holds a fixed position rather than tilting, giving a neat, level square aperture across a run of multiple points.\u003c\/p\u003e\n\u003cp\u003eRated IP44, it is splash-protected and suits both general rooms and sheltered damp areas such as a bathroom ceiling away from direct water, a kitchen, an entrance porch or a covered outdoor soffit. The compact 84 by 84 mm trim with a 30 mm recess depth keeps it discreet in lower ceilings, and the square form lines up cleanly in grids where a row of even, geometric apertures is wanted. Plan the spacing of several fittings around the room for steady, balanced coverage.\u003c\/p\u003e\n\u003cp\u003eThe body is aluminium alloy in a black finish, with a maximum lamp wattage of 10W so it pairs with standard low-wattage GU10 LED lamps. The bulb is not included, leaving you free to match the output and tone to the space. Installation is by spring clips into the ceiling cut-out, and the fixed-position design means no adjustment once seated.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eRecessed downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulb cap (lamp not included)\u003c\/td\u003e\n\u003ctd\u003eGU10 twist-lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eFixed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out\u003c\/td\u003e\n\u003ctd\u003e60mm cut-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax lamp wattage\u003c\/td\u003e\n\u003ctd\u003emax 10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminium Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour \/ finish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e84 × 84 × 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp included\u003c\/td\u003e\n\u003ctd\u003eNo, supplied without a bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs a bulb included with this downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, the fitting is supplied without a lamp. It accepts a single GU10 twist-lock bulb, which you choose and buy separately to suit the brightness and tone you want.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size ceiling cut-out does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt fits a 60mm cut-out and recesses to a depth of 30mm. The square trim measures 84 by 84 mm, so check you have at least that clearance and depth above the ceiling line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in a bathroom or outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt carries an IP44 rating, so it is protected against splashes and suits sheltered damp areas such as a bathroom ceiling clear of direct water, or a covered porch or soffit. It is not rated for fully exposed positions or direct water jets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the fitting tilt or adjust?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this is a fixed-position downlight, so the aperture points straight down once seated. For an aimable beam you would need an adjustable spotlight fitting instead.\u003c\/p\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39543-spec.pdf?v=1782205422\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-39543-datasheet.pdf?v=1782205423\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53201305829643,"sku":"39543","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/39543.jpg?v=1782205597","url":"https:\/\/niori.co.uk\/products\/gu10-recessed-downlight-square-ip44-60mm-cut-out-10w-max-black-talu","provider":"Niori","version":"1.0","type":"link"}