{"product_id":"grid-switch-cover-marked-wine-cooler-white","title":"Grid Switch Cover Marked 'Wine Cooler' - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis Knightsbridge grid switch cover is a white ABS rocker marked 'WINE COOLER' in black print, designed to replace the plain rocker on a standard grid switch. The cover clips onto 20A DP grid switches used for appliance circuits, allowing the outlet to be clearly labelled at the point of use rather than relying on back-of-board labelling or memory.\u003c\/p\u003e\n\u003cp\u003eUsed in kitchens, utility rooms and hospitality fit-outs where multiple appliances share a bank of switches, pre-printed covers reduce confusion and make it easier for occupants to isolate specific appliances for maintenance or emergency shutdown. The cover is compatible with Knightsbridge Grid and Grid Pro ranges, and fits standard 20A double-pole grid switches from other manufacturers using the same rocker profile.\u003c\/p\u003e\n\u003cp\u003eThe white ABS construction matches standard white grid plates and the IP20 rating suits dry indoor environments. The rocker measures 33mm high by 16mm wide with a 6.8mm projection from the switch mounting frame. The print is black ink on white, providing high contrast for readability in typical ambient kitchen lighting.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e6.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_3905953_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat switches is this compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cover fits standard 20A DP grid switches from the Knightsbridge Grid and Grid Pro ranges, and most other manufacturers' grid switches using the same rocker profile. It will not fit traditional plate switches or screwless switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the rocker replaced?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe existing plain rocker clips off the front of the grid switch module and the new pre-printed rocker clips on in its place. No tools or re-wiring are needed, but the circuit should be isolated before removing or replacing the rocker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the print wear off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe black print is applied to the ABS surface and can fade or wear over time with repeated finger contact, especially in high-traffic hospitality environments. Wipe gently with a dry cloth rather than abrasive cleaning products to extend the life of the print.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45293559283979,"sku":"GDWINEU","price":1.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/460224_95b5ff65-4d75-4c41-bbc5-cfe230fe0b39.jpg?v=1714660394","url":"https:\/\/niori.co.uk\/products\/grid-switch-cover-marked-wine-cooler-white","provider":"Niori","version":"1.0","type":"link"}