{"product_id":"fire-rated-ip65-fixed-downlight-chrome","title":"Fire Rated IP65 Fixed Downlight - Chrome","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eThis is a fixed recessed downlight rated IP65 and described by the manufacturer as fire rated, finished in chrome. The front is a round chrome bezel holding a clear lens, and behind it sits a black cylindrical housing with ventilation slots along its side. Two sprung steel clips fold up to grip the plasterboard once the fitting is pushed up into the ceiling. Fixed, rather than tilt, means the lens sits square in the bezel: the light goes straight down, and there is nothing to aim or re-adjust once the ceiling is made good.\u003c\/p\u003e\u003cp\u003eThe IP65 rating is the reason this one goes where water is about. The manufacturer states it is suitable for bathroom zones 3, 2 and 1, but not zone 0, which is the inside of the bath or the shower tray itself. In practice that covers a ceiling above a bath, a ceiling above a shower enclosure, and the rest of the room. It is equally at home in a kitchen, where steam and cooking splashes carry further than people expect, and in a utility room or a shower room whose ceiling also has to hold its fire resistance between floors.\u003c\/p\u003e\u003cp\u003eFire rated downlights exist because every hole cut into a ceiling takes something away from the fire resistance of the floor above, and a fire rated body is built to close that hole again as heat builds. The duration in minutes is not stated by the manufacturer, so if a specific figure has been asked for on site, check that first. The wattage, the lamp cap and the cut-out diameter are not stated either, so measure your existing holes and centres before committing to a run of them. It sits alongside our other downlights in chrome and brushed chrome, including GU10 tilt versions and a slimline IP65 fixed downlight.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFixed recessed downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65, stated as suitable for bathroom zones 3, 2 and 1, not zone 0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire rating\u003c\/td\u003e\n\u003ctd\u003eFire rated; the duration in minutes is not stated by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle downlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e1, sold in multiples of 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eCan I fit this above a shower or a bath?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. The manufacturer states it suits bathroom zones 3, 2 and 1, which covers a ceiling above a shower enclosure or a bath, but not zone 0, the inside of the tray or tub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it take a separate bulb, or is the LED built in?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacturer does not state the light source or the lamp cap for this fitting, so please check with us before you buy if you need a particular lamp type.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does it need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cut-out diameter is not stated by the manufacturer. If you are replacing existing downlights, measure the holes you already have rather than assuming a common size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be dimmed?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo dimming information is given by the manufacturer. On a fitting that takes a lamp, dimming usually depends on the lamp fitted and on the dimmer switch being rated for LED loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it a tilt downlight?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo, it is fixed, so the beam points straight down. If you want to wash a wall or angle light onto artwork, choose a tilt downlight instead; we stock GU10 tilt versions in chrome.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose a fire rated downlight at all?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCutting holes in a ceiling reduces the fire resistance of the floor above. A fire rated body is designed to close that hole again as heat builds, which matters in a house of more than one storey.\u003c\/p\u003e","brand":"PowerMaster","offers":[{"title":"Default Title","offer_id":53385928966411,"sku":"S6594","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S6594_01.jpg?v=1790252186","url":"https:\/\/niori.co.uk\/products\/fire-rated-ip65-fixed-downlight-chrome","provider":"Niori","version":"1.0","type":"link"}