{"product_id":"fire-rated-gu10-tilt-downlight-white","title":"Fire-Rated GU10 Tilt Downlight - White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Knightsbridge fire-rated tilt downlight is a recessed GU10 fitting built for ceiling installations where fire safety compliance is required. The housing combines pressed steel and aluminium construction with intumescent seals tested to BS476 Part 21 \u0026amp; 23, providing 30\/60\/90 minute fire rating in solid timber ceilings and 30 minute rating in web-joist and I-joist constructions. The white front bezel tilts up to 15 degrees from vertical, allowing the GU10 lamp to be angled towards walls, artwork or seating positions rather than firing straight down.\u003c\/p\u003e\n\u003cp\u003eDesigned for residential refurbishment, new builds under Building Regulations Part B, and commercial installations needing fire compartmentalisation, the downlight fits an 84mm ceiling cut-out with spring clip fixings that accommodate ceiling thicknesses up to 30mm. The insulation-compatible housing allows loft insulation to be pushed against the rear without overheating risk. Electrical termination uses a 10A connector block inside a secure enclosure with cord grip, compatible with standard fixed wiring.\u003c\/p\u003e\n\u003cp\u003eThe twist-and-lock front ring allows GU10 lamps to be changed without removing the entire fitting from the ceiling. The housing accepts standard GU10 halogen lamps up to 50W and retrofit LED or CFL lamps up to 60mm in length, making it compatible with most current GU10 LED bulbs rated between 3-7W. Dimming capability depends on the lamp fitted — most GU10 LED lamps now support standard phase-dimming when paired with LED-compatible dimmers.\u003c\/p\u003e\n\u003cp\u003eThe white powder-coat finish on the bezel blends into white or off-white ceilings without creating a visual interruption. The 5mm projection from ceiling to bezel face keeps the fitting low-profile once installed. The IP20 rating makes the downlight suitable for dry interior spaces including living rooms, bedrooms, hallways and offices, but not bathrooms or outdoor covered areas which require IP44 or higher.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e101 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecessed Depth\u003c\/td\u003e\n\u003ctd\u003e105 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-out Diameter\u003c\/td\u003e\n\u003ctd\u003e84 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt\u003c\/td\u003e\n\u003ctd\u003e15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePressed steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction 2\u003c\/td\u003e\n\u003ctd\u003e\u0026amp; aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Voltage\u003c\/td\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology\u003c\/td\u003e\n\u003ctd\u003eHalogen \/ LED Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eLamp dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Wattage\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_1306121_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/manual_800426.pdf\" target=\"_self\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fire rating does this downlight carry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting is tested to BS476 Part 21 \u0026amp; 23 and provides 30\/60\/90 minute fire rating in solid timber ceilings, 30 minute rating in web-joist constructions, and 30 minute rating in I-joist (Staircraft) ceilings. It complies with Building Regulations Part B (Fire Safety) for UK installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan insulation touch the housing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The housing is insulation-compatible, meaning loft insulation can be pushed against the rear and sides without creating overheating or fire risk. This is essential for maintaining thermal performance in insulated ceilings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat GU10 bulbs fit this downlight?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting accepts standard GU10 halogen lamps up to 50W and retrofit GU10 LED or CFL lamps up to 60mm in length. Most current GU10 LED bulbs (typically 3-7W) fit comfortably within the 60mm length limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it dimmable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimming depends on the GU10 lamp fitted. If you install a dimmable GU10 LED lamp and pair it with an LED-compatible dimmer, the fitting will dim. The housing itself does not restrict dimming — it's purely lamp-dependent.\u003c\/p\u003e","brand":"Knightsbridge","offers":[{"title":"Default Title","offer_id":45294023639307,"sku":"VFRSGICW","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/101026_526b8824-71e3-49d5-bdad-676a58a42b52.jpg?v=1714667392","url":"https:\/\/niori.co.uk\/products\/fire-rated-gu10-tilt-downlight-white","provider":"Niori","version":"1.0","type":"link"}