{"product_id":"ecliptus-100w-constant-voltage-led-driver-1-10v-dimmable-24v","title":"Ecliptus 100W Constant Voltage LED Driver - 1-10V Dimmable 24V","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Ecliptus is a 100W constant voltage LED driver designed for 24V LED lighting systems, providing 1-10V analogue dimming control across a 0-100% output range. The driver converts 230V AC mains input to stable 24V DC output, delivering up to 4.17A continuous current to power LED strip lights, recessed downlights, under-cabinet lighting and other 24V constant voltage LED fixtures.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in ceiling voids, under-cabinet cavities and other concealed locations, the driver requires adequate ventilation and carries an IP20 rating suitable for dry indoor environments only. The 1-10V dimming interface accepts control signals from compatible wall-mounted dimmers, lighting control systems and building management platforms, allowing smooth dimming without flicker across the full brightness range. The 210mm x 67mm footprint fits standard ceiling grid modules and typical void depths above suspended ceilings.\u003c\/p\u003e\n\u003cp\u003eThe white plastic housing includes mounting lugs at either end for fixing to joists, battens or dedicated driver rails. Input and output terminals accept cables up to 2.5mm² and are clearly marked for polarity. The driver incorporates overload, short-circuit and over-temperature protection, automatically shutting down and resetting once fault conditions clear. Ideal Lux backs the unit with a 5-year warranty covering component and manufacturing defects.\u003c\/p\u003e\n\u003cp\u003eThe constant voltage output maintains stable 24V regardless of connected load, provided total wattage stays within the 100W maximum. This makes the driver compatible with both short runs of high-power LED strip and longer runs of lower-density strip, without requiring load calculations beyond total wattage. The 1-10V dimming protocol is industry-standard and works with most professional dimming controls, though compatibility with specific consumer dimmers should be confirmed before installation.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (mm)\u003c\/td\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProjection (mm)\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat LED fixtures is this driver compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ecliptus powers any 24V constant voltage LED fixture with a combined load up to 100W. Common applications include 24V LED strip lights, recessed downlights, under-cabinet lights and linear profiles. The driver is not suitable for 12V fixtures or constant current LED fittings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require a separate dimmer control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The driver responds to a 1-10V analogue control signal from a compatible wall dimmer, lighting control module or building management system. Without a 1-10V signal connected, the driver outputs at full brightness. Standard trailing-edge or leading-edge domestic dimmers will not work with this driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used in bathrooms or outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The IP20 rating restricts installation to dry indoor locations only. For bathrooms, kitchens and outdoor applications, use an IP65 or IP67 rated driver instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ventilation is needed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver dissipates heat through convection via the plastic housing. Install in a location with air circulation and avoid enclosing the driver in insulation, sealed boxes or tight cavities with no airflow. Mounting vertically with terminals facing downward aids heat dissipation.\u003c\/p\u003e","brand":"Ideal Lux","offers":[{"title":"Default Title","offer_id":45733005721867,"sku":"244570","price":83.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/244570_WEB001_STRIP_LED_DRIVER_1_10V_100W_1a177ad1-8eea-4634-8d77-cdec0431dd42.jpg?v=1727796413","url":"https:\/\/niori.co.uk\/products\/ecliptus-100w-constant-voltage-led-driver-1-10v-dimmable-24v","provider":"Niori","version":"1.0","type":"link"}