{"product_id":"e14-ses-led-filament-candle-bulb-2-5w-200lm-warm-white-1950k","title":"E14 (SES) LED Filament Candle Bulb 2.5W 200lm - Warm White 1950K","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis LED candle bulb pairs a gold tinted glass envelope with two straight filament strips set up the middle, so there is something to look at when the light is off as well as on. It draws 2.5W and gives 200 lumens, which the retail pack calls a 25W replacement. The cap is E14, the small screw fitting usually written as SES. The colour sits at the warm end: the manufacturer's specification gives 1,950K while the pack prints 2700K, so treat it as a warm, slightly amber light rather than a neutral white.\u003c\/p\u003e\n\u003cp\u003eA gold glass bulb is meant to be seen, so it suits a fitting that leaves the glass uncovered: a chandelier with upward candle holders, a pendant cluster over a dining table, a wall light with an open shade, or a bedside lamp. At 200 lumens the output is soft on its own, close to an old 25W candle lamp, so it works best where several lamps share the work or where a brighter source nearby handles reading. On a landing or in a hallway, one or two give enough gentle light for the evening.\u003c\/p\u003e\n\u003cp\u003eThe pack marks the lamp as non dimmable, so put it on a plain on and off switch; on a dimmer circuit a non dimmable lamp can flicker, buzz or fail early. The beam angle is quoted at 320 degrees, so light goes sideways and down as well as up. It carries an IP20 rating for dry indoor use, and its energy label gives class G at 3kWh\/1000h, which is usual for filament styling that trades some efficiency for the look of the glass. The pack also prints a 15 year lifespan. One unit is one bulb, with a minimum order of 12 in multiples of 12. Our wider range of LED candle bulbs runs to B15 (SBC) caps in warm white 2700K and cool white 4000K.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003eE14 (SES)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShape\u003c\/td\u003e\n\u003ctd\u003eCandle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eLED filament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e2.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrightness\u003c\/td\u003e\n\u003ctd\u003e200lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquivalent\u003c\/td\u003e\n\u003ctd\u003e25W, as printed on the pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature\u003c\/td\u003e\n\u003ctd\u003eWarm white, 1,950K in the specification; the pack prints 2700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e320 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimmable\u003c\/td\u003e\n\u003ctd\u003eNo, the pack marks it non dimmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy rating\u003c\/td\u003e\n\u003ctd\u003eG at 3kWh\/1000h on the energy label; the pack prints class E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLifespan as printed\u003c\/td\u003e\n\u003ctd\u003e15 years, as printed on the pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSingle bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum order\u003c\/td\u003e\n\u003ctd\u003e12, sold in multiples of 12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my existing candle light fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cap is E14, the smaller screw fitting also written as SES. Check the old bulb for a screw thread of about 14mm across rather than a bayonet cap with two pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow bright is 200 lumens in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is gentle, close to an old 25W candle bulb. Plan on three or more lamps in a chandelier, or pair one with a brighter fitting where you need to read.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on a dimmer switch?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The pack marks it as non dimmable, so it belongs on an ordinary on and off switch; a dimmer can cause flicker, buzzing or early failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour is the light?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWarm. The specification gives 1,950K and the retail pack prints 2700K, so we quote both; either way it reads warm and amber leaning rather than crisp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the glass look gold when the lamp is off?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe envelope carries a gold tint, which warms the light and keeps the two filament strips on show. That tint is what gives the amber cast unlit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many do I have to order?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach unit is a single bulb in a blister pack, and the minimum order is 12 units, sold in multiples of 12.\u003c\/p\u003e","brand":"Energizer","offers":[{"title":"Default Title","offer_id":53385991946507,"sku":"S9431","price":1.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/S9431_01.jpg?v=1790252921","url":"https:\/\/niori.co.uk\/products\/e14-ses-led-filament-candle-bulb-2-5w-200lm-warm-white-1950k","provider":"Niori","version":"1.0","type":"link"}