{"product_id":"duceri-bulkhead-flush-mounting-kit-white-metal-frame","title":"Duceri Bulkhead Flush Mounting Kit - White Metal Frame","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Duceri flush mounting kit is a white metal frame designed for recessing ESP's EMLED3WMBULK2 and EMLED5WMBULK emergency bulkhead fittings into plasterboard or similar ceiling and wall constructions. The kit measures 403 x 165 x 40mm and provides a clean, flush-fitted appearance where surface-mounted emergency lighting would protrude too far or clash with the interior finish.\u003c\/p\u003e\n\u003cp\u003eDesigned for installation in commercial, industrial and residential settings where emergency lighting must comply with BS 5266 or local fire safety regulations, the kit allows the bulkhead to sit level with the ceiling or wall surface. The metal construction supports the weight of the emergency fitting and distributes load across the mounting points, while the white finish matches the factory colour of the ESP bulkheads it is designed to accommodate.\u003c\/p\u003e\n\u003cp\u003eThe frame fits between ceiling joists or within stud wall cavities, with the bulkhead then clipping or fixing into the recessed frame. This allows the emergency light to be installed flush in corridors, stairwells, lobbies and other circulation spaces where a protruding fitting would reduce headroom or be vulnerable to impact. The 40mm depth of the kit means it can be accommodated in standard 50mm ceiling voids or 75mm stud walls without requiring additional structural modification.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Net Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e0.58\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Gross Weight (KG)\u003c\/td\u003e\n\u003ctd\u003e5.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Length (mm)\u003c\/td\u003e\n\u003ctd\u003e403\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Width (mm)\u003c\/td\u003e\n\u003ctd\u003e165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Height (mm)\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Length (mm)\u003c\/td\u003e\n\u003ctd\u003e345\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Width (mm)\u003c\/td\u003e\n\u003ctd\u003e430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Height (mm)\u003c\/td\u003e\n\u003ctd\u003e420\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/products_EMBULK2FLUSH_datasheet.pdf\" target=\"_blank\"\u003eProduct Specification Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhich ESP bulkheads is this kit compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Duceri flush mounting kit is designed specifically for ESP's EMLED3WMBULK2 and EMLED5WMBULK emergency bulkhead fittings. It is not compatible with other bulkhead models or brands without checking dimensional compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat ceiling or wall depth is required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is 40mm deep, so it requires a minimum ceiling void or stud wall depth of 50mm to allow clearance for wiring and fixing. Standard 50mm plasterboard ceiling constructions and 75mm stud walls typically provide sufficient depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the bulkhead included with the kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The kit is the recessed mounting frame only. The emergency bulkhead fitting (EMLED3WMBULK2 or EMLED5WMBULK) must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for wall installation as well as ceiling?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The kit can be fitted into wall cavities as well as ceiling voids, provided the wall construction offers the necessary depth and structural support for the combined weight of the frame and bulkhead.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":45294077411595,"sku":"EMBULK2FLUSH","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/EMBULK2FLUSH_28653945-7817-414a-b216-65302e04b45f.jpg?v=1714667816","url":"https:\/\/niori.co.uk\/products\/duceri-bulkhead-flush-mounting-kit-white-metal-frame","provider":"Niori","version":"1.0","type":"link"}