{"product_id":"copper-rs485-dmx-signal-cable-for-dmx-lighting-control","title":"Copper RS485 DMX Signal Cable for DMX Lighting Control","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\u003cp\u003eThis is a copper DMX signal cable, the link that carries the control signal from a DMX controller out to the lighting equipment it drives. Under a smooth grey sheath sit two inner cores, one blue and one white, each with a copper conductor. Around the pair runs a foil screen, and over the foil sits a close braid, so the cores are screened twice before the outer sheath goes on. It is a plain, practical cable rather than anything decorative, made to sit out of sight and do one job well.\u003c\/p\u003e\u003cp\u003eIt belongs in a DMX colour changing installation, where it joins the DMX controller to the equipment that takes its signal. That makes it the cable to reach for when you are putting together colour changing lighting wherever the system sits indoors, from a small home setup to a larger commercial one. It is rated for ambient temperatures from minus 20°C up to 70°C, so an unheated room in winter or a warm spot near other equipment is well within what it is made for. Keep its route dry, away from anywhere it could be splashed.\u003c\/p\u003e\u003cp\u003eThe two screens and the grey sheath keep the cores together and protected along the run, and the copper conductors carry the signal from end to end. The cable does not dim or switch anything on its own: it is the path for the DMX signal, and what the lights do is set at the controller. It comes with an extended 1-year warranty. In practice, it is best run, cut to length and terminated by whoever is installing and commissioning the DMX system, so the whole installation is set up as one.\u003c\/p\u003e\u003ch5\u003eSpecification\u003c\/h5\u003e\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e76 x 203 x 76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCopper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e-20-70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (extended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.05KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch5\u003eDownloads\u003c\/h5\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/DMX_RS_485_CABLE_DS.pdf?v=1794536784\" target=\"_blank\"\u003eSpecification Sheet\u003c\/a\u003e\u003c\/p\u003e\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\u003cp\u003e\u003cstrong\u003eWhat is this DMX signal cable used for?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries the DMX control signal in a colour changing installation, joining the DMX controller to the equipment that takes the signal and drives the lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the cable made?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt has two copper cores, one blue and one white, wrapped in a foil screen with a braid over the foil, all inside a grey outer sheath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperatures can the cable be used in?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is rated for ambient temperatures from minus 20°C up to 70°C, so a cold unheated room or a warm spot near other equipment is fine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cable dim the lights itself?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo. It only carries the DMX signal. Dimming and colour changes are set at the DMX controller and carried out by the equipment it controls.\u003c\/p\u003e","brand":"Collingwood Lighting","offers":[{"title":"Default Title","offer_id":53530798260491,"sku":"DMX RS 485 CABLE","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/copper-rs485-dmx-signal-cable-for-dmx-lighting-control-01.jpg?v=1794561119","url":"https:\/\/niori.co.uk\/products\/copper-rs485-dmx-signal-cable-for-dmx-lighting-control","provider":"Niori","version":"1.0","type":"link"}