{"product_id":"cob-led-strip-19w-m-rgbw-5m-24v-colour-selectable-cool-white","title":"COB LED Strip 19W\/m RGBW 5m 24V Colour Selectable - Cool White","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis COB LED strip lays down a continuous, dot-free line of light along a flexible reel, so there are no visible diodes or spotting across the run. It draws 19W per metre and gives 420 lumens per metre, combining RGB colour with a 4000K white channel for both coloured effects and a clean neutral white. The reel measures 5m and runs on a 24V DC supply rather than direct mains. In the US this style of fitting is known as COB led tape light, valued for the same smooth, even line that ordinary spaced SMD reels cannot quite match.\u003c\/p\u003e\n\u003cp\u003eBecause the light comes as a low, linear band rather than a broad ceiling spread, it suits cove and ceiling-recess detailing, under-cabinet runs in a kitchen, shelving, display niches and around mirrors or media units. The RGBW mix lets you set warm scene colours or switch to the 4000K white channel for practical task light beneath a cupboard. Coverage is best judged by length of run rather than floor area: each metre adds the same even output, so plan the strip to follow the edge or surface you want to graze with light. The IP00 rating means it is for dry indoor positions only, kept clear of bathrooms, damp areas and any outdoor location.\u003c\/p\u003e\n\u003cp\u003eThe strip cuts to length only at the marked points, which fall every 7.1cm, so it can be trimmed to fit a precise span. It carries a CRI of Ra90 for accurate colour and tone, and is rated for around 30,000 hours of life. As a 24V DC strip it is not mains-direct and needs a matching 24V LED driver, sold separately, sized to the total wattage of the length you install. The reel weighs 96g. Our COB strip range also includes single-colour and tunable white options on the same 24V platform if RGBW is more than a project needs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e19 W\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous flux\u003c\/td\u003e\n\u003ctd\u003e420 lm\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd\u003e22 lm\/W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriver\u003c\/td\u003e\n\u003ctd\u003e24V DC LED driver required (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRGBW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour rendering (CRI)\u003c\/td\u003e\n\u003ctd\u003eRa 90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut interval\u003c\/td\u003e\n\u003ctd\u003eevery 7.1 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReel length\u003c\/td\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/kanlux-38913-datasheet.pdf?v=1782065600\" target=\"_blank\"\u003eRange Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this strip need a separate driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is a 24V DC strip, not a mains-direct fitting, so it needs a 24V LED driver to run safely. The driver is sold separately and should be rated to cover the total wattage of the length you install, at 19W per metre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can the strip be cut?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt cuts to length only at the marked cut points, which occur every 7.1cm along the reel. Trim at one of these marks so the circuit stays complete, then connect the cut end back to the driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used outdoors or in a bathroom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This strip is rated IP00, which is for dry indoor use only. Keep it out of bathrooms, kitchens splash zones, damp areas and any outdoor location, and choose an IP65 coated strip for those settings instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I keep the strip clean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the surface gently with a dry or barely damp soft cloth while the strip is switched off and cool. Avoid solvents and soaking, as the strip is uncoated, and make sure it is fully dry before powering it back on.\u003c\/p\u003e\n","brand":"Kanlux","offers":[{"title":"Default Title","offer_id":53196525764875,"sku":"38913","price":94.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/38913.jpg?v=1782066114","url":"https:\/\/niori.co.uk\/products\/cob-led-strip-19w-m-rgbw-5m-24v-colour-selectable-cool-white","provider":"Niori","version":"1.0","type":"link"}