{"product_id":"citronic-plx3600-class-h-2u-rackmount-power-amplifier","title":"Citronic PLX3600 Class H 2U Rackmount Power Amplifier","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic PLX3600 is a two-channel power amplifier built into a 19\" 2U rackmount case. It delivers 2 x 1350W into 4 Ohms, with output stable down to 2 Ohms per side. When you need more power from a single output, bridge mode combines both channels for high power mono operation into a 4 Ohm load. Class H architecture keeps power delivery efficient and reliable, and dual fan cooling helps the amp run steadily through long sessions.\u003c\/p\u003e\n\u003cp\u003eConnections are straightforward for live and installed setups. Balanced inputs are on XLR sockets, so you can run signal in from a mixer or processor with good noise rejection. Speaker outputs are provided on two Speakon (SPK) connectors and on 4mm binding posts, giving you a choice depending on your cabling. Front panel controls cover level for each channel, ground, mode and the clip limiter. The switchable ground lift helps deal with hum loops, while the switchable clip limiter protects your speakers by holding back the signal before it distorts hard.\u003c\/p\u003e\n\u003cp\u003eThe amp measures 482 x 453 x 88mm and runs from a 230Vac, 50Hz IEC mains supply. Frequency response spans 5Hz to 50kHz, with total harmonic distortion of 0.05% and a damping factor above 400 for tight control over connected drivers. A slew rate of 40V\/us and 20k Ohm input impedance round out the electrical figures. Built-in protection guards against short-circuit, overload, D.C. faults and thermal problems, so the PLX3600 keeps working safely when pushed. It suits mobile PA, club and fixed install use where you want dependable power in a compact rack space.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e230Vac, 50Hz (IEC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eLevel channel 1, level channel 2, ground, mode, clip limiter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e20k ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e5Hz - 50kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal harmonic distortion\u003c\/td\u003e\n\u003ctd\u003e0.05%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew rate\u003c\/td\u003e\n\u003ctd\u003e40V\/us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping factor\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eShort-circuit, overload, D.C. and thermal protect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e482mm x 453mm x 88mm (2U)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/172218UK_6215179d-0143-4802-ae71-fec9c2b136fc.pdf?v=1784990135\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow much power does the PLX3600 produce?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt delivers 2 x 1350W into 4 Ohms. Output is stable down to 2 Ohms per side, and both channels can be bridged into a 4 Ohm load for high power mono.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat speaker connections does it have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpeaker outputs are on two Speakon (SPK) connectors and 4mm binding posts, so you can wire it up to suit your cabling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat inputs does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBalanced inputs are on XLR sockets, with an input impedance of 20k Ohms and a switchable ground lift to help reduce hum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt fits a standard 19\" rack and takes up 2U of height. Full dimensions are 482 x 453 x 88mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat protection features are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe amp has short-circuit, overload, D.C. and thermal protection, plus a switchable clip limiter to guard your speakers from hard distortion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the amplifier kept cool?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses dual fan cooling alongside Class H architecture to keep power delivery efficient and reliable during long periods of use.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271815487755,"sku":"172.218UK","price":699.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/172218UK_0.jpg?v=1784990153","url":"https:\/\/niori.co.uk\/products\/citronic-plx3600-class-h-2u-rackmount-power-amplifier","provider":"Niori","version":"1.0","type":"link"}