{"product_id":"citronic-p44800-2-1-stereo-sub-power-amplifier","title":"Citronic P44800 2.1 Stereo \u0026 Sub Power Amplifier","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic P44800 is a 2.1 power amplifier (amp) built to run a full sound system from a single unit. It gives you two channels for your mid-top cabinets rated at 400W each, plus a high power mono sub output rated at 800W. That sub feed is summed from both channels, so you get the low end handled without needing a separate amplifier for the subs.\u003c\/p\u003e\n\u003cp\u003eThe reason we like this one is the integral active crossover. It sits inside the amp with a variable crossover frequency from 50 to 250Hz at 12dB per octave, so you can split the signal between your tops and subs without adding an external crossover unit. The sub output can also be switched to full range if you want three matched channels rather than a bi-amplified setup. That makes it a practical, cost effective choice for smaller PA rigs and mobile setups where space and budget matter.\u003c\/p\u003e\n\u003cp\u003eConnections cover 3 x female XLR, 3 x jack and 3 x Speakon-style SPK outputs, with front panel controls for each channel level plus the crossover frequency. Input impedance is 40k Ohms balanced and 20k Ohms unbalanced, with a damping factor above 250 and a frequency response of 10Hz to 50kHz. THD+N sits at 0.04% and the signal to noise ratio is 86dB. A fixed 30Hz low-cut filter keeps the sub channel clean at the bottom end. The unit runs on a 240Vac 50Hz IEC supply and takes up 2U of rack space at 483 x 439 x 88mm.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e3 x XLRF, 3 x jack, 3 x SPK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut-off frequency\u003c\/td\u003e\n\u003ctd\u003e50 - 250Hz (12dB\/oct)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e483mm x 439mm x 88mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e240Vac, 50Hz (IEC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003e3 x channel level + crossover frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance (balanced\/unbalanced)\u003c\/td\u003e\n\u003ctd\u003e40k Ohms \/ 20k Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping factor\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;250 (20-400Hz @ 8 Ohms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew rate\u003c\/td\u003e\n\u003ctd\u003e6.5V\/us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e10Hz - 50kHz (-2dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD +N\u003c\/td\u003e\n\u003ctd\u003e0.04%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to noise ratio\u003c\/td\u003e\n\u003ctd\u003e86dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-cut filter\u003c\/td\u003e\n\u003ctd\u003e30Hz fixed (12dB\/oct)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/172248UK_bcd03970-d1c6-45e1-90a8-9d685e358472.pdf?v=1784990260\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the 2.1 configuration mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt means two channels for your mid-top cabinets plus one dedicated sub channel. The sub output is a mono sum of both channels, so you can run tops and subs together from this one amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have a built-in crossover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. There is an integral active crossover with a variable frequency from 50 to 250Hz at 12dB per octave, so you can split the signal between tops and subs without an external unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the sub output run full range instead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The mono summed sub output can be switched to full range if you would rather use it as a third matched channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connections does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has 3 x female XLR and 3 x jack inputs, plus 3 x SPK (Speakon-style) speaker outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much rack space does it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a 2U unit measuring 483 x 439 x 88mm, so it fits a standard 19-inch rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power output does it deliver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two full range channels are rated at 400W each and the sub output is rated at 800W.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271816241419,"sku":"172.248UK","price":499.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/172248UK_0.jpg?v=1784990277","url":"https:\/\/niori.co.uk\/products\/citronic-p44800-2-1-stereo-sub-power-amplifier","provider":"Niori","version":"1.0","type":"link"}