{"product_id":"citronic-nl2-10lf-3004-10-300w-subwoofer-driver","title":"Citronic NL2-10LF-3004 10\" 300W Subwoofer Driver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis is a 10\" subwoofer driver from Citronic, built to handle low frequency content in sub cabinets. It pairs well with satellite or array speakers, taking care of the deep end while the smaller boxes handle the mids and highs. With 300W rms power handling and a maximum rating of 600W, it copes with sustained bass levels without complaint. The 4 Ohm impedance suits most sub amplifier setups you're likely to be running.\u003c\/p\u003e\n\u003cp\u003eThe cone is reinforced paper mounted on a steel basket, a combination that keeps things rigid under load. A 50mm (2\") voice coil and a 1.13kg ceramic magnet drive the movement, and the sensitivity sits at 94dB. Frequency response runs from 45Hz to 2.5kHz, so it covers the low end you'd want from a dedicated sub driver. The unit measures 140 x 260mm in diameter and weighs 3.0kg.\u003c\/p\u003e\n\u003cp\u003eThis driver is a direct replacement for the Neolith mk2 sub unit, so if you're servicing an existing cabinet the fit and specification match up. Whether you call it a subwoofer driver or a woofer, the job is the same: moving air to give you the low frequency weight a full range system needs. Order the correct part and you can have your sub back in working order without hunting for a compatible substitute.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eReinforced paper cone, steel basket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : rms\u003c\/td\u003e\n\u003ctd\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : max\u003c\/td\u003e\n\u003ctd\u003e600W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e4 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e45Hz - 2.5kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e50mmØ (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet\u003c\/td\u003e\n\u003ctd\u003e1.13kg (40oz) ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e94dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e140mm x 260mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power handling does this driver have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt handles 300W rms and 600W maximum. That gives you headroom for peaks while running a steady 300W programme level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is this subwoofer driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's a 4 Ohm driver, which suits most sub amplifiers and cabinet configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a direct replacement for the Neolith mk2 sub?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's a direct replacement for the Neolith mk2 sub unit, so the fit and specification match the original.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the frequency response?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver runs from 45Hz to 2.5kHz, covering the low frequency range you'd expect from a dedicated sub driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size is the cone?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt's a 10\" driver. The unit measures 140 x 260mm in diameter and weighs 3.0kg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cone made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cone is reinforced paper mounted on a steel basket, with a 50mm voice coil and a 1.13kg ceramic magnet.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272100569355,"sku":"902.230UK","price":58.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/902230UK_0.jpg?v=1785048097","url":"https:\/\/niori.co.uk\/products\/citronic-nl2-10lf-3004-10-300w-subwoofer-driver","provider":"Niori","version":"1.0","type":"link"}