{"product_id":"citronic-ml3-12lf-3504-12-350w-subwoofer-driver","title":"Citronic ML3-12LF-3504 12\" 350W Subwoofer Driver","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic ML3-12LF-3504 is a 12-inch subwoofer driver built to handle the low frequency content in sub cabinets. It carries 350W RMS power handling, with a maximum of 700W, so it copes with the demands of bass reproduction when paired with satellite or array speakers. The 4 ohm impedance and 95dB sensitivity make it a practical choice for anyone building or repairing a sub enclosure.\u003c\/p\u003e\n\u003cp\u003eThis driver uses a reinforced paper cone on a steel basket, which keeps the moving parts stable under load. A 50mm (2\") voice coil sits behind a 1.28kg ceramic magnet, and the frequency response runs from 40Hz up to 2kHz. That range keeps the focus on the low end, where a subwoofer earns its place. The unit measures 310mm across and 160mm deep, and weighs 6.0kg, so it fits standard 12\" cabinet cut-outs.\u003c\/p\u003e\n\u003cp\u003eWe supply the ML3-12LF-3504 as a direct replacement for the Monolith mk3 sub unit, which makes it a straightforward swap if you already run that system. Whether you are servicing an existing rig or fitting a fresh driver into a new build, the fixings and dimensions line up with the original part. Note that in the US a subwoofer driver like this is often called a woofer or bass driver, but the fitment and figures are the same. It is a working component rather than a finished speaker, so plan your cabinet and wiring to match the 4 ohm load.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eReinforced paper cone, steel basket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : rms\u003c\/td\u003e\n\u003ctd\u003e350W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : max\u003c\/td\u003e\n\u003ctd\u003e700W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e4 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e40Hz - 2kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e50mmØ (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet\u003c\/td\u003e\n\u003ctd\u003e1.28kg (45oz) ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e95dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e160mm x 310mmØ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e6.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the power handling of this driver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt handles 350W RMS with a maximum rating of 700W, suited to low frequency use in sub cabinets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is the ML3-12LF-3504?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver is 4 ohms. Make sure your amplifier is happy driving a 4 ohm load before wiring it in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit the Monolith mk3 sub?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It is a direct replacement for the Monolith mk3 sub unit, so the dimensions and fixings match the original.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size cabinet cut-out does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver measures 310mm across and 160mm deep, matching standard 12-inch subwoofer cut-outs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the frequency response?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs from 40Hz to 2kHz, keeping the output focused on the low frequency range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come as a complete speaker?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, this is a driver component only. You will need a suitable sub cabinet and wiring to use it.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53272100602123,"sku":"902.232UK","price":72.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/902232UK_0.jpg?v=1785048132","url":"https:\/\/niori.co.uk\/products\/citronic-ml3-12lf-3504-12-350w-subwoofer-driver","provider":"Niori","version":"1.0","type":"link"}