{"product_id":"citronic-h3200-hybrid-class-h-power-amplifier","title":"Citronic H3200 Hybrid Class-H Power Amplifier","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic H3200 is a lightweight power amplifier built into a 19\" rack-mountable housing, made for generating high sound pressure levels in medium to large sound reinforcement systems. It delivers 2x1200W into 4 ohms and is stable down to 2 ohms, or 4 ohms when bridged. The hybrid class-H architecture combines the efficiency of a digitally controlled power section with the power delivery and stability of a professional class-H output stage, so you get dependable service without the weight penalty of older designs.\u003c\/p\u003e\n\u003cp\u003eComprehensive internal protection monitors thermal and overload conditions, mutes automatically at power on and off, and provides active inrush limiting. A backlit LCD status display shows supply voltage, internal temperature and output level as you work, so you can keep an eye on the amp during long sessions. The fully balanced signal path has three switchable input sensitivity levels (1.0V, 1.4V and 2.0V) to match different audio sources, and the amplifier can run in Stereo, Parallel or Bridge modes.\u003c\/p\u003e\n\u003cp\u003eA switchable 120Hz low-pass filter can be selected for use with subwoofers, which avoids the need for a separate crossover and saves both expense and rack space. Speaker outputs connect using one or two Speakon leads as required. Frequency response runs 20Hz to 20kHz (±0.5dB) with THD+N of 0.2% and a signal-to-noise ratio of -95dB. The H3200 gives sound contractors and PA installers immediate, dynamic power on demand with reliable output quality across the range.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e200-240Vac, 50Hz (IEC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier : construction\u003c\/td\u003e\n\u003ctd\u003eHybrid Class-H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eShort\/open circuit, thermal, RF, DC fault, on\/off mute, active inrush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20Hz-20KHz ±0.5dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD +N\u003c\/td\u003e\n\u003ctd\u003e0.2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N ratio\u003c\/td\u003e\n\u003ctd\u003e-95dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping factor\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput sensitivity\u003c\/td\u003e\n\u003ctd\u003e1.0V - 1.4V - 2.0V switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e20KΩ (balanced),10KΩ (unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover\u003c\/td\u003e\n\u003ctd\u003eSwitchable full range or fixed 120Hz low-pass filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/172132UK_3c743b3c-fe1c-4ff3-a5a4-2912d623d8c8.pdf?v=1784989829\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power does the H3200 deliver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt provides 2x1200W into 4 ohms. It is stable down to 2 ohms per channel, or 4 ohms when bridged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat operating modes does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe amplifier section can be set to Stereo, Parallel or Bridge modes, so you can match it to your system layout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a separate crossover for subwoofers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The switchable 120Hz low-pass filter can be selected for subwoofer use, saving the cost and rack space of a separate crossover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are the speaker outputs connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpeaker outputs connect using one or two Speakon leads as required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat input sensitivity options are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are three switchable input sensitivity levels: 1.0V, 1.4V and 2.0V, to match different audio sources.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat protection features are built in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInternal protection covers short\/open circuit, thermal, RF, DC fault, on\/off mute and active inrush limiting.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271814045963,"sku":"172.132UK","price":679.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/172132UK_0.jpg?v=1784989847","url":"https:\/\/niori.co.uk\/products\/citronic-h3200-hybrid-class-h-power-amplifier","provider":"Niori","version":"1.0","type":"link"}