{"product_id":"citronic-h1600-hybrid-class-h-power-amplifier-2x650w","title":"Citronic H1600 Hybrid Class-H Power Amplifier 2x650W","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic H1600 is a lightweight power amplifier built into a 19\" rack-mountable housing, made for driving medium to large sound reinforcement systems. It uses a hybrid class-H architecture that pairs a digitally controlled power section with a professional class-H output stage, giving you efficient running alongside solid power delivery. The amplifier is stable down to 2 ohms, or 4 ohms when bridged, and delivers 2x650W at 4 ohms. That combination suits sound contractors and PA installers who need dependable service and clear sound.\u003c\/p\u003e\n\u003cp\u003eThe power section is digitally controlled and monitored, with a backlit LCD showing supply voltage, internal temperature and output level so you can keep an eye on things during a job. Internal protection covers short and open circuit, thermal, RF, DC fault and on\/off mute, plus active inrush limiting to manage the current draw at start-up. A fully balanced signal path offers three switchable input sensitivity settings (1.0V, 1.4V and 2.0V) to match different audio sources, and the amplifier can run in stereo, parallel or bridge modes.\u003c\/p\u003e\n\u003cp\u003eA switchable 120Hz low-pass filter (also called a crossover) can be selected for use with subwoofers, which saves you fitting a separate crossover and frees up rack space and budget. Speaker outputs can be connected using one or two Speakon leads as needed. The frequency response runs 20Hz to 20kHz at ±0.5dB, with THD+N of 0.2%, a signal-to-noise ratio of -95dB and a damping factor above 700. It runs from a 200-240Vac, 50Hz IEC supply.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e200-240Vac, 50Hz (IEC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier : construction\u003c\/td\u003e\n\u003ctd\u003eHybrid Class-H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eShort\/open circuit, thermal, RF, DC fault, on\/off mute, active inrush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20Hz-20KHz ±0.5dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD +N\u003c\/td\u003e\n\u003ctd\u003e0.2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N ratio\u003c\/td\u003e\n\u003ctd\u003e-95dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping factor\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput sensitivity\u003c\/td\u003e\n\u003ctd\u003e1.0V - 1.4V - 2.0V switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e20KΩ (balanced),10KΩ (unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover\u003c\/td\u003e\n\u003ctd\u003eSwitchable full range or fixed 120Hz low-pass filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eDownloads\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/172117UK_49ec72aa-9b35-4926-a609-2560fccf8890.pdf?v=1784989744\" target=\"_blank\"\u003eProduct Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power does the H1600 deliver?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt delivers 2x650W at 4 ohms. The amplifier is stable down to 2 ohms in stereo, or 4 ohms when run in bridge mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it with subwoofers without a separate crossover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It has a switchable 120Hz low-pass filter, so you can feed subwoofers directly without adding a separate crossover, saving rack space and cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat operating modes does it support?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe amplifier section can be set to stereo, parallel or bridge mode, so you can match it to your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I connect speakers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpeaker outputs use Speakon connectors, and you can wire up with one or two Speakon leads depending on your needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat protection features are built in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInternal protection covers short and open circuit, thermal, RF and DC faults, automatic mute at power on and off, plus active inrush limiting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat input sensitivity options are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are three switchable input sensitivity levels: 1.0V, 1.4V and 2.0V, to suit different audio sources through the balanced signal path.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271812997387,"sku":"172.117UK","price":519.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/172117UK_0.jpg?v=1784989766","url":"https:\/\/niori.co.uk\/products\/citronic-h1600-hybrid-class-h-power-amplifier-2x650w","provider":"Niori","version":"1.0","type":"link"}