{"product_id":"citronic-dmx-sr8-8-way-dmx-splitter-1u-rack-mount","title":"Citronic DMX-SR8 8-Way DMX Splitter, 1U Rack-Mount","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic DMX-SR8 takes a single DMX512 signal and shares it across eight isolated outputs, keeping your lighting fixtures fed with a clean, steady feed. It sits in a 1U 19-inch rack chassis, so it slots straight into touring racks, fixed installs and professional lighting control setups. Alongside the eight outputs you get one DMX input and a link output (also called a thru output), giving you a tidy way to pass the signal on or expand your setup.\u003c\/p\u003e\n\u003cp\u003eElectrical isolation is the point of this unit. Each of the outputs is isolated, and there's isolation between the input and the thru output too. That means a fault or fault-borne interference on one part of the DMX line stays contained rather than spreading through your whole rig. Each output supports up to 32 fixtures, so a full eight-output setup covers a large number of heads without you needing to daisy-chain long, fragile runs. If you only need four outputs, the splitter can run in a 4-way mode.\u003c\/p\u003e\n\u003cp\u003eDMX connections use 3-pin XLR throughout: one 3-pin input, one 3-pin thru, and eight 3-pin outputs. Power comes in through a twist-and-lock connector and the unit runs on AC90V to 240V at 50Hz or 60Hz, drawing 15W. It measures 45mm x 140mm x 484mm and weighs 1.77kg, so it's light enough for touring yet built into a robust metal chassis for daily use. For anyone running a busy lighting rig, it's a straightforward way to protect your gear and keep signal integrity across long cable runs.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eAC90V~240V, 50Hz\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e15w\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e45mm x 140mm x 484mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.77KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower connection\u003c\/td\u003e\n\u003ctd\u003ePower in (twist and lock)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDMX connection\u003c\/td\u003e\n\u003ctd\u003e1 x 3-Pin Input, 1 x 3-Pin Thru, 8 x 3-Pin Output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow many fixtures can each output handle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach of the eight outputs supports up to 32 fixtures, giving you plenty of headroom across a large rig.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the electrical isolation do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe outputs are isolated from each other, and the input is isolated from the thru output. This keeps a fault or interference on one part of the DMX line from affecting the rest of your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it as a 4-way splitter instead of 8-way?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The unit distributes to 8 outputs, or 4 outputs if that suits your setup better.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat DMX connectors does it use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses 3-pin XLR connections: 1 input, 1 thru, and 8 outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a standard 19-inch rack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It's built into a 1U 19-inch rack chassis, so it mounts into standard racks used for touring and fixed installs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat power supply does it need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt runs on AC90V to 240V at 50Hz or 60Hz and draws 15W, with a twist-and-lock power connector.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53270755901707,"sku":"154.106UK","price":114.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/154106UK_0.jpg?v=1784972356","url":"https:\/\/niori.co.uk\/products\/citronic-dmx-sr8-8-way-dmx-splitter-1u-rack-mount","provider":"Niori","version":"1.0","type":"link"}