{"product_id":"citronic-cuba-8-passive-full-range-pa-cabinet","title":"Citronic CUBA-8 Passive Full-Range PA Cabinet","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic CUBA-8 is a passive full-range PA speaker built around a wooden enclosure with a hard-wearing polyurea coating and a powder-coated steel grille. It uses custom designed high power LF (low frequency) and HF (high frequency) drivers, with the main driver and an efficient HF compression or dome tweeter working alongside the tuned enclosure. The result is a balanced output across the frequency range, suited to professional sound reinforcement.\u003c\/p\u003e\n\u003cp\u003eConnections sit on the rear panel, with either 2 x Speakon sockets or a single Speakon plus 4mm binding posts, depending on the model. This lets you link onto additional speakers as your setup grows. Each cabinet has two side handles for handling and a 35mm pole mount socket for stand mounting. The rear also carries two different bevels, so you can angle the cabinet for ground level placement or use it in a suspended array. Multiple M8 flying points are inset for rigging, and the CUBA-8 is supplied with a U-bracket.\u003c\/p\u003e\n\u003cp\u003eWith an 8 Ohm impedance and MDF construction under the polyurea finish, the CUBA-8 is one of three cabinets in the range alongside the CUBA-6 and CUBA-10. We recommend pairing it with Citronic PLX, D and H-series amplifiers for high power work. Whether you need fixed installation, mobile PA or general reinforcement, the CUBA-8 gives you a rugged cabinet that handles plenty of power and links cleanly with other units.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e435mm x 265mm x 265mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHF dispersion\u003c\/td\u003e\n\u003ctd\u003e100°\/50° x 55°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. SPL\u003c\/td\u003e\n\u003ctd\u003e121.0dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e95dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e60Hz-19kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : max\u003c\/td\u003e\n\u003ctd\u003e500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : rms\u003c\/td\u003e\n\u003ctd\u003e250W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHF driver\u003c\/td\u003e\n\u003ctd\u003e35mmØ (1.35\") Ti compression driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e50mmØ (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain driver\u003c\/td\u003e\n\u003ctd\u003e200mmØ (8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eSPK socket and 4mm binding posts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolyurea coated MDF + powder-coated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the CUBA-8 active or passive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a passive speaker cabinet, so it needs an external amplifier. We recommend Citronic PLX, D or H-series amplifiers to drive it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is the CUBA-8?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cabinet is rated at 8 Ohms, which suits most standard PA amplifiers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount the CUBA-8 on a stand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It has a 35mm pole mount socket for stand mounting, plus two side handles for carrying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the CUBA-8 be flown or arrayed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Multiple M8 flying points are inset on the cabinet, and two rear bevels let you angle it for ground level placement or suspended arraying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connections does the CUBA-8 use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rear panel has either 2 x Speakon or a single Speakon with 4mm binding posts, depending on the model, so you can link additional speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the CUBA-8 supplied with a bracket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The CUBA-6, CUBA-8 and CUBA-10 are all supplied with a U-bracket.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271919132939,"sku":"178.709UK","price":189.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/178709UK_0.jpg?v=1785007007","url":"https:\/\/niori.co.uk\/products\/citronic-cuba-8-passive-full-range-pa-cabinet","provider":"Niori","version":"1.0","type":"link"}