{"product_id":"citronic-cuba-10w-passive-full-range-pa-speaker-cabinet","title":"Citronic CUBA-10W Passive Full-Range PA Speaker Cabinet","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic CUBA-10W is a passive full-range PA speaker cabinet (also called a loudspeaker cabinet) built for professional sound reinforcement. The enclosure is made from MDF finished with a hard-wearing polyurea coating, topped with a powder-coated steel grille to protect the drivers. Inside, custom designed high power LF and HF drivers work with the tuned enclosure to give a balanced output across low, mid and high frequencies. The white finish makes it a good match for venues and events where a lighter look suits the room.\u003c\/p\u003e\n\u003cp\u003eConnections on the rear panel use either 2 x Speakon or a single Speakon with 4mm binding posts, depending on the model, so you can link one cabinet onto another. The impedance is rated at 8 Ohms. For mounting, there is a 35mm pole-mount socket for stand use, plus multiple M8 flying points inset on the cabinet for suspended arraying. Two different bevels on the rear allow angled placement at ground level or when the cabinet is hung. Two side handles make it easier to carry and position, and the CUBA-6, CUBA-8 and CUBA-10 are supplied with a U-bracket.\u003c\/p\u003e\n\u003cp\u003eWe recommend running the CUBA-10W with Citronic PLX, D and H-series amplifiers, which suit its high power handling. Being passive, the cabinet has no built-in amp, so you pair it with a separate power amplifier to match your setup. This makes it a flexible choice for install work, live music and general public address across a range of professional situations. The combination of a rugged coated wooden enclosure, steel grille and multiple mounting options means the cabinet copes well with regular use on the road or in a fixed install.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.50KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e507mm x 313mm x 307mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHF dispersion\u003c\/td\u003e\n\u003ctd\u003e100°\/50° x 55°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. SPL\u003c\/td\u003e\n\u003ctd\u003e122.5dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e95dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e55Hz-19kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : max\u003c\/td\u003e\n\u003ctd\u003e540W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : rms\u003c\/td\u003e\n\u003ctd\u003e270W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHF driver\u003c\/td\u003e\n\u003ctd\u003e35mmØ (1.35\") Ti compression driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e50mmØ (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain driver\u003c\/td\u003e\n\u003ctd\u003e250mmØ (10\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003eSPK socket and 4mm binding posts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolyurea coated MDF + powder-coated steel grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIs the CUBA-10W active or passive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is a passive cabinet, so it has no built-in amplifier. You need a separate power amp, such as a Citronic PLX, D or H-series unit, to drive it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is the CUBA-10W?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cabinet is rated at 8 Ohms. Check this against your amplifier's output ratings to make sure they are compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it connect to an amplifier?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe rear panel uses either 2 x Speakon or a single Speakon with 4mm binding posts, depending on the model. This lets you link onto additional speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount it on a stand or fly it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. There is a 35mm pole-mount socket for stand mounting, and multiple M8 flying points for suspended arraying. Two rear bevels allow angled placement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cabinet made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe enclosure is polyurea coated MDF with a powder-coated steel grille, so it stands up to regular use and protects the drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bracket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CUBA-6, CUBA-8 and CUBA-10 are supplied with a U-bracket for wall or ceiling mounting.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271921852683,"sku":"178.741UK","price":229.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/178741UK_0.jpg?v=1785007684","url":"https:\/\/niori.co.uk\/products\/citronic-cuba-10w-passive-full-range-pa-speaker-cabinet","provider":"Niori","version":"1.0","type":"link"}