{"product_id":"citronic-casa-10b-300wrms-passive-subwoofer-cabinet","title":"Citronic CASA-10B 300Wrms Passive Subwoofer Cabinet","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe Citronic CASA-10B is a compact passive subwoofer cabinet built for portable PA use. Each cabinet is made from 15mm MDF with a hard-wearing texture polyurea paint finish, keeping it light enough to carry while standing up to regular gigging and transport. Two side carry handles make it easy to lift and position, and a 35mm pole mount socket lets you sit a satellite speaker directly on top for a full range setup.\u003c\/p\u003e\n\u003cp\u003eThe front-loaded sub driver is protected by a steel grille and handles 300Wrms, delivering solid low end and adding warmth to any sound system. You can run it in low pass filtered mode, using the built-in 120Hz 12dB\/oct filter, or take a direct input depending on how you want to set up your rig. Connection is via two Speakon (SPK) sockets on the rear panel, so you can link cabinets and feed output from your power amplifier with standard Speakon leads. The cabinet runs at 8 Ohms.\u003c\/p\u003e\n\u003cp\u003eWe designed the CASA-10B to pair with the wider CASA range of PA cabinets, though it works just as well in any high energy sound reinforcement setup. The 15in and 18in models in the range include mounting points for castors, so you can add wheels for bigger cabinets if you need them. If you want a small footprint sub that adds low end without weighing you down, this is a practical choice for mobile DJs, bands and hire stock.\u003c\/p\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003ctable class=\"spec_table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e12.00KG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e431mm x 407mm x 338mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e60Hz - 2.0kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPL max.\u003c\/td\u003e\n\u003ctd\u003e120.0dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : max\u003c\/td\u003e\n\u003ctd\u003e500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling : rms\u003c\/td\u003e\n\u003ctd\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice coil\u003c\/td\u003e\n\u003ctd\u003e50mmØ (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSub driver\u003c\/td\u003e\n\u003ctd\u003e250mmØ (10\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e15mm MDF with texture polyurea finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003e2 x side carry handles + 35mm pole mount socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e2 x SPK socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e8 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter type\u003c\/td\u003e\n\u003ctd\u003e120Hz low pass 12dB\/oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eFrequently Asked\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the power handling of the CASA-10B?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt handles 300Wrms, driven from a power amplifier via the rear Speakon sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I connect the subwoofer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are two Speakon (SPK) sockets on the rear panel. Use Speakon leads from your power amplifier, and you can link cabinets together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount a speaker on top?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. There is a 35mm pole mount socket on top, so you can fit a mounting pole and sit a satellite speaker above the sub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have a built-in crossover?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a 120Hz low pass filter at 12dB\/oct. You can run it filtered or use a direct input, depending on your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat impedance is the cabinet?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CASA-10B runs at 8 Ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cabinet made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is built from 15mm MDF with a texture polyurea paint finish, with two side carry handles for portability.\u003c\/p\u003e\n","brand":"AVSL","offers":[{"title":"Default Title","offer_id":53271913824523,"sku":"178.121UK","price":238.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8993\/3835\/files\/178121UK_0.jpg?v=1785005372","url":"https:\/\/niori.co.uk\/products\/citronic-casa-10b-300wrms-passive-subwoofer-cabinet","provider":"Niori","version":"1.0","type":"link"}